OscilloBP Monitor

phantranthehuy·mpx5050-blood-pressure-monitor·Hardware/Schematics, PCB layouts/OscilloBP Monitor/OscilloBP Monitor/OscilloBP Monitor.kicad_pcb

OscilloBP Monitor PCB layout, top view — open source STM32 board by phantranthehuy

About the OscilloBP Monitor PCB

OscilloBP Monitor is an open source STM32 PCB design by phantranthehuy, published on GitHub under the MIT license. It is a 2-layer board measuring 95 × 99 mm, with 51 components from 33 distinct parts.

Its main chip is the ZC323000, from the STM32 family. Other key parts include the TP4056, MT3608, ADS1115IDGST and MPXV5050GP. By type, the board carries 14 resistors, 12 capacitors, 6 diodes, 5 ICs, 4 transistors and 3 connectors.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

Research and development of a digital blood pressure monitor using MPX5050 sensor and oscillometric signal processing.

The system operates based on the Oscillometric Method. It extracts tiny pressure oscillations (AC component) superimposed on the static cuff pressure (DC component) during the deflation phase. By analyzing the envelope of these oscillations, the system calculates the Mean Arterial Pressure (MAP), Systolic Pressure (SYS), Diastolic Pressure (DIA), and Heart Rate (BPM).

Main components on the OscilloBP Monitor

OscilloBP Monitor bill of materials (BOM)

51 components, 33 distinct parts.

QtyPartRefs
1
TP4056
U101
1
MT3608
U102
1
ZC323000
U401
1
ADS1115IDGST
U501
1
MPXV5050GP
U601
2
AO3400A
Q201, Q202
2
BSS138
Q301, Q302
1
Conn_01x04_Pin
J101
1
Conn_01x02_Pin
J102
1
Terminal_01x04
J201
1
Battery_Cell
BT101
1
100K
RV101
3
SW_Push
SW_HIGH401, SW_START401, SW_STOP401
1
SS34
D101
2
1N5819
D201, D202
1
LED_RED
D401
1
LED_GREEN
D402
1
LED_YELLOW
D403
1
CBG201209U252T
FB601
1
22uH
L101
Show 13 more
QtyPartRefs
2
22uF
C101, C102
3
100nF
C103, C104, C105
1
1000uF - 16V
C201
1
100uF - 35V
C202
3
1µF
C501, C502, C601
1
10nF
C602
1
470pF
C603
1
2.2K
R101
2
100R
R201, R203
2
4.7k
R202, R204
5
10k
R301, R302, R303, R304, R502
3
220R
R401, R402, R403
1
1K
R501

OscilloBP Monitor design files

The KiCad project lives in the phantranthehuy/mpx5050-blood-pressure-monitor repository on GitHub; these links point at the commit this page was built from.

OscilloBP Monitor: common questions

What microcontroller does the OscilloBP Monitor use?

The OscilloBP Monitor is built around the ZC323000, from the STM32 family.

How big is the OscilloBP Monitor PCB?

The OscilloBP Monitor measures 95 × 99 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the OscilloBP Monitor?

51 components, from 33 distinct parts. The full bill of materials is listed on this page.

Where can I download the OscilloBP Monitor design files?

From the phantranthehuy/mpx5050-blood-pressure-monitor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the OscilloBP Monitor design in my own project?

Yes, under the terms of its MIT license, which phantranthehuy chose for the repository.

Can I test firmware for the OscilloBP Monitor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in mpx5050-blood-pressure-monitor

Similar boards