2 open source boards using the ZC323000
Real designs built with the ZC323000, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Line-Follower-Robot-Using-STM32F103C8T6-with-TCRT-5000
bonavirak
99.8 × 82 mm32 parts2LMIT11STM32
OscilloBP Monitor
phantranthehuy
95 × 99 mm51 parts2LMIT0
The ZC323000 in open source designs
The gallery holds 2 open source boards using the ZC323000 from 2 GitHub repositories; a typical one measures about 97.4 × 90.5 mm and carries around 42 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Line-Follower-Robot-Using-STM32F103C8T6-with-TCRT-5000 by bonavirak.
Microcontrollers on boards using the ZC323000
What boards using the ZC323000 are built for
ZC323000: common questions
Where can I find a ZC323000 reference design?
Each of the 2 boards on this page is a real design using the ZC323000. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ZC323000 use?
Most are built on STM32 (2).
How big is a typical board using the ZC323000?
The median is 97.4 × 90.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the ZC323000?
By GitHub stars, Line-Follower-Robot-Using-STM32F103C8T6-with-TCRT-5000 by bonavirak, with 11 stars.
Can I simulate one of these boards using the ZC323000 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.