Ivegotdapower elec board fille
PhenixRobotik·ivegotdapower-elec·board_fille/ivegotdapower-elec_board_fille.kicad_pcb
About the Ivegotdapower elec board fille
Ivegotdapower elec board fille is an open source PCB design by PhenixRobotik, published on GitHub. It is a 2-layer board measuring 44.5 × 20.3 mm, with 36 components from 22 distinct parts.
Other key parts include the LM2596S-ADJ and L5973D. By type, the board carries 11 resistors, 9 capacitors, 4 connectors, 4 diodes, 2 ICs and 2 fuses.
It belongs with the power & battery designs in this gallery.
From the project
Carte alimentation de TheySeeMeRolling
Carte alimentation de PhenixRobotik pour la base roulante TheySeeMeRolling.
Dual power input with no-cut switch Battery 6S (24V max) * Power supply
Multiple power outputs Power (direct, 6A) Elec (7.5V ~3A) USB (for Rpi, 2A) * …
stm32f3 LiPoBipper (équilibrage) ? (ou direct sur la batterie == plus safe ?)
* Bouton d'arrêt d'urgence qui coupe la puissance moteurs ?
Main components on the Ivegotdapower elec board fille
Ivegotdapower elec board fille bill of materials (BOM)
36 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596S-ADJ | TO-263-5_TabPin3 | U1 |
| 1 | L5973D | HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias | U2 |
| 2 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J1, J3 |
| 2 | Conn_02x03_Odd_Even | PinSocket_2x03_P2.54mm_Vertical | J2, J4 |
| 2 | Fuse | Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1, F2 |
| 2 | R_POT | Potentiometer_Vishay_TS53YL_Vertical | RV1, RV2 |
| 2 | D_Schottky 3A 40V | D_SMA_Handsoldering | D1, D3 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D4 |
| 1 | 33uH | L_12x12mm_H8mm | L1 |
| 1 | 15uH | L_Bourns-SRU8043 | L2 |
| 1 | 100uF | CP_Elec_8x10 | C1 |
| 1 | 220uF | CP_Elec_10x10 | C2 |
| 2 | 15nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C7 |
| 1 | 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4 |
| 1 | 22nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5 |
| 1 | 220pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6 |
| 1 | C | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C8 |
| 1 | 330uF | CP_Elec_8x10 | C9 |
| 2 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R7 |
| 2 | 3.1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R8 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4, R5, R9, R10, R11 |
| 1 | 4k7 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
Ivegotdapower elec board fille design files
The KiCad project lives in the PhenixRobotik/ivegotdapower-elec repository on GitHub; these links point at the commit this page was built from.
Ivegotdapower elec board fille: common questions
How big is the Ivegotdapower elec board fille?
The Ivegotdapower elec board fille measures 44.5 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ivegotdapower elec board fille?
36 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ivegotdapower elec board fille design files?
From the PhenixRobotik/ivegotdapower-elec repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Ivegotdapower elec board fille design in my own project?
The repository has no license, so all rights stay with PhenixRobotik. Use it as a reference, and ask the author before reusing the design.
More boards in ivegotdapower-elec
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k