Theyseemerolling elec
PhenixRobotik·theyseemerolling-elec
About the Theyseemerolling elec PCB
Theyseemerolling elec is an open source STM32 PCB design by PhenixRobotik, published on GitHub. It is a 2-layer board measuring 75 × 50 mm, with 82 components from 41 distinct parts.
Its main chip is the STM32F303K8Tx, from the STM32 family. Other key parts include the L6205PD, LD1117S50TR_SOT223, ACS711xLCTR-12AB, 74HC00 and LD1117S33TR_SOT223. By type, the board carries 28 capacitors, 20 resistors, 9 ICs, 9 diodes, 8 connectors and 5 transistors.
It belongs with the robotics & motion, sensors and test & measurement designs in this gallery.
From the project
Stm32f3 (?) Voltage instrumentation (power, digital) * Power current instrumentation
Stm32f3 (?) Voltage instrumentation (power, digital) * Power current instrumentation
IOs : Power alimentation Digital alimentation JTAG debug (daisy-chain) CAN Bus (daisy-chain) UART ?
2 roues codeuses + 2 encodeurs rotatifs : (suggestion salamandar) Broadcom AS22-M570-xxxx Ø22mm × 10.9mm 360 cpr to 2048 cpr dual-channel + index channel 5V
* 2 moteurs Maxon DC + 2 encodeurs rotatifs
Main components on the Theyseemerolling elec
Theyseemerolling elec bill of materials (BOM)
82 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L6205PD | ST_PowerSO-20_SlugDown_ThermalVias | IC2 |
| 1 | STM32F303K8Tx | LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | LD1117S50TR_SOT223 | SOT-223-3_TabPin2 | U2 |
| 2 | ACS711xLCTR-12AB | SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 1 | 74HC00 | SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U6 |
| 1 | TCAN332 | SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | AT25SF041 | SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 5 | BSS138 | SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 1 | Conn_Encoder1 | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J1 |
| 1 | Conn_Power_In | PhoenixContact_MCV_1,5_2-G-3.81_1x02_P3.81mm_Vertical | J2 |
| 1 | Conn_SWD_UART | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J3 |
| 1 | Conn_Mot1 | PhoenixContact_MCV_1,5_2-G-3.81_1x02_P3.81mm_Vertical | J4 |
| 1 | Conn_Mot2 | PhoenixContact_MCV_1,5_2-G-3.81_1x02_P3.81mm_Vertical | J5 |
| 1 | Conn_Encoder2 | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J6 |
| 2 | CAN_conn | JST_XH_B05B-XH-A_1x05_P2.50mm_Vertical | J7, J8 |
| 1 | Polyfuse 2A | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 5A | Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F2 |
| 1 | JP_Select_Boot | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | D_Schottky_AAK | TO-252-2 | D1 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | D | D_2114_3652Metric_Castellated | D2 |
| 2 | 1N4148 | D_0805_2012Metric_Castellated | D3, D4 |
| 5 | LED_ALT | LED_0805_2012Metric_Castellated | D5, D6, D7, D8, D9 |
| 7 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C7, C15 |
| 1 | C | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6 |
| 2 | 1n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C9 |
| 2 | 10u | CP_Elec_4x5.4 | C10, C25 |
| 1 | 220n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C11 |
| 2 | 5.6n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C12, C13 |
| 1 | 10n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C14 |
| 1 | 100u | CP_Elec_8x10 | C16 |
| 1 | 4.7u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C17 |
| 7 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C18, C19, C20, C21, C22, C23, C24 |
| 3 | 100p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C26, C27, C28 |
| 6 | 10kR | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R5, R6, R7, R11, R16 |
| 4 | R_LED | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R4, R15 |
| 1 | 100R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8 |
| 2 | 100k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9, R10 |
| 2 | R_Sense | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12, R14 |
| 1 | 1kR | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13 |
| 4 | R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R18, R19, R20, R21 |
Theyseemerolling elec design files
The KiCad project lives in the PhenixRobotik/theyseemerolling-elec repository on GitHub; these links point at the commit this page was built from.
Theyseemerolling elec: common questions
What microcontroller does the Theyseemerolling elec use?
The Theyseemerolling elec is built around the STM32F303K8Tx, from the STM32 family.
How big is the Theyseemerolling elec PCB?
The Theyseemerolling elec measures 75 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Theyseemerolling elec?
82 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the Theyseemerolling elec design files?
From the PhenixRobotik/theyseemerolling-elec repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Theyseemerolling elec design in my own project?
The repository has no license, so all rights stay with PhenixRobotik. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Theyseemerolling elec without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k