8 open source boards using the L6205PD
Real designs built with the L6205PD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Hellen121vag
rusefi
164 × 118 mm121 parts4LNo license7Hellen88bmw
rusefi
160 × 118 mm298 parts4LNo license2Hellen154hyundai
rusefi
164 × 156 mm201 parts4LNo license1Hellen miata-NA6
rusefi
154 × 159 mm196 parts2LNo license1Hellen miata-NA8
rusefi
154 × 159 mm186 parts2LNo license1Hellen miata-NB1
rusefi
154 × 159 mm185 parts2LNo license1Hellen72 NB2
rusefi
154 × 159 mm175 parts2LNo license0STM32
Theyseemerolling elec
PhenixRobotik
75 × 50 mm82 parts2LNo license0
How designs wire the L6205PD
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the L6205PD connects to, and the resistors, capacitors and other passives placed on it.
- The VCP pin has a series capacitor on 7 of 8 designs, most often 10 nF.
- The ENA pin has a capacitor to GND on 7 of 8 designs, most often 6.8 nF (then 5.6 nF).
- The ENA pin has a series resistor on 7 of 8 designs, most often 100 kΩ.
- The ENB pin has a capacitor to GND on 7 of 7 designs, most often 6.8 nF (then 5.6 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND@1pin 1 | Connected to: GND 88% | — |
| VSApin 2 | Connected to: 12V 88% |
|
| VCPpin 4 | Connected to: Signal 88% |
|
| ENApin 5 | Connected to: Signal 88% |
|
| IN2Apin 7 | Connected to: ETB 75% | — |
| SENSEApin 8 | Connected to: GND 75% · a signal 25% | — |
| GND@2pin 10 | Connected to: GND 100% | — |
| GND@3pin 11 | Connected to: GND 100% | — |
| SENSEBpin 13 | Connected to: GND 86% | — |
| IN2Bpin 15 | Connected to: ETB 86% | — |
| ENBpin 16 | Connected to: Signal 100% |
|
| VBOOTpin 17 | Connected to: Signal 100% |
|
| VSBpin 19 | Connected to: 12V 100% |
|
| GND@4pin 20 | Connected to: GND 100% | — |
| SLUG@1pin SLUG1 | Connected to: GND 100% | — |
| SLUG@2pin SLUG2 | Connected to: GND 100% | — |
| SLUG@3pin SLUG3 | Connected to: GND 100% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hellen121vag by rusefi, Hellen88bmw by rusefi, Hellen miata-NA6 by rusefi and Hellen miata-NA8 by rusefi.
The L6205PD in open source designs
The gallery holds 8 open source boards using the L6205PD from 8 GitHub repositories; a typical one measures about 154 × 157.5 mm and carries around 186 components.
63% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Hellen121vag by rusefi.
Parts used alongside the L6205PD
Microcontrollers on boards using the L6205PD
What boards using the L6205PD are built for
L6205PD: common questions
Where can I find a L6205PD reference design?
Each of the 8 boards on this page is a real design using the L6205PD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L6205PD VCP pin connected?
The VCP pin has a series capacitor on 7 of 8 designs, most often 10 nF. Counted from the KiCad layouts of 8 open source designs using the L6205PD.
How is the L6205PD ENA pin connected?
The ENA pin has a capacitor to GND on 7 of 8 designs, most often 6.8 nF (then 5.6 nF). Counted from the KiCad layouts of 8 open source designs using the L6205PD.
How is the L6205PD ENB pin connected?
The ENB pin has a capacitor to GND on 7 of 7 designs, most often 6.8 nF (then 5.6 nF). Counted from the KiCad layouts of 8 open source designs using the L6205PD.
What parts are used alongside the L6205PD?
The MCP6002-XSN, LIS2DW12TR, LPS25HB, MPX4_MAP and TLS115_SOIC appear in the most repositories here.
Which microcontrollers do boards using the L6205PD use?
Most are built on STM32 (1).
How big is a typical board using the L6205PD?
The median is 154 × 157.5 mm, and 63% are two-layer designs.
What is the most popular open source board using the L6205PD?
By GitHub stars, Hellen121vag by rusefi, with 7 stars.
Can I simulate one of these boards using the L6205PD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.