Pinball Matrix board Rev 1
Phil-CIA·Pinball-Sw-Lamp-Matrix-·hardware/Pinball Matrix board Rev 1.kicad_pcb
About the Pinball Matrix board Rev 1
Pinball Matrix board Rev 1 is an open source ESP32 PCB design by Phil-CIA, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 151 components from 36 distinct parts.
Its main chip is the ESP32-C6-DEVKITM-AMAZON, from the ESP32 family. Other key parts include the LMV393, 74HC595D and VNQ7E100AJTR. By type, the board carries 70 resistors, 33 capacitors, 12 test points, 12 inductors, 10 diodes and 8 ICs.
From the project
This project Build 8 row x 4 row lamp and a 8x 4 switch matrix scanner board For The Captain Fantastic - Home Edition Pinball Machine
This folder contains the KiCad project files and production exports for the pinball switch + lamp matrix board.
Main components on the Pinball Matrix board Rev 1
Pinball Matrix board Rev 1 bill of materials (BOM)
151 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LMV393 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1, U2 |
| 1 | ESP32-C6-DEVKITM-AMAZON ESP32-C6-DevKitM-Amazon | ESP32-C6-DevKit-Amazon | U3 |
| 2 | 74HC595D Nexperia | SOIC-16_L9.9-W3.9-P1.27-LS6.0-BL | U4, U5 |
| 2 | VNQ7E100AJTR | SOP50P600X148-17N | U6, U7 |
| 1 | ~ | 0.96 inOLED display SSD1306 | U8 |
| 2 | B4B-XH-A JST | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1, J2 |
| 1 | CONN_01X13_PIN Conn_01x13_Pin | Molex_KK-396_A-41791-0013_1x13_P3.96mm_Vertical | J3 |
| 1 | CONN_01X10_PIN Conn_01x10_Pin | Molex_KK-396_A-41791-0010_1x10_P3.96mm_Vertical | J4 |
| 1 | C49166597 Polyfuse | poly fuse | F1 |
| 1 | C720075 Polyfuse | L_1206 | F2 |
| 11 | TestPoint_Small | KEYSTONE_5015 | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +3 |
| 1 | TestPoint | PinSocket_1x01_P2.54mm_Vertical | TP10 |
| 1 | H24VL10B hongjiacheng | D_DFN1006-2L | D1 |
| 1 | H3V3LD5B hongjiacheng | D_SOD-523 | D2 |
| 2 | C2297 Green Hubei KENTO Elec | D_0805 | D3, D9 |
| 1 | C2296 Yellow Hubei KENTO Elec | D_0805 | D4 |
| 4 | C37704 BAT54C,215 Nexperia | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | D5, D6, D7, D8 |
| 1 | H5VND5B hongjiacheng | D_SOD-523 | D10 |
| 7 | C1015 FerriteBead Sunlord | L_1206 | FB1, FB2, FB3, FB4, FB5, FB6, FB7 |
| 5 | IRLZ44NPBF IRLZ24 | TO-252-2 | L1, L2, L3, L4, L5 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 47UF 47uF Samsung Electro-Mechanics | C_1206 | C1, C2, C3, C4, C6 |
| 10 | 100NF 100nF YAGEO | C_0805 | C5, C12, C15, C17, C18, C19, C20, C21 +2 |
| 11 | 1NF 1nF Samsung Electro-Mechanics | C_0805 | C7, C8, C9, C10, C26, C27, C28, C29 +3 |
| 5 | 1UF 1uF Samsung Electro-Mechanics | C_0805 | C11, C13, C14, C24, C25 |
| 1 | 330UF 330uf | CP_Radial_D6.3mm_P2.50mm | C16 |
| 1 | 100UF 100uF Samsung Electro-Mechanics | C_1206 | C34 |
| 6 | 4.7kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R1, R2, R3, R4, R5, R6 |
| 4 | 47kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R7, R8, R9, R10 |
| 18 | 220Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R11, R17, R18, R19, R20, R30, R32, R34 +10 |
| 1 | 330Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R12 |
| 13 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R13, R14, R15, R16, R25, R26, R27, R29 +5 |
| 12 | 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R21, R22, R23, R24, R31, R33, R35, R37 +4 |
| 1 | 3kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R28 |
| 6 | 15kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R46, R47, R58, R60, R61, R63 |
| 2 | 1kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R59, R62 |
| 7 | 100Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R64, R65, R66, R67, R68, R69, R70 |
Pinball Matrix board Rev 1 design files
The KiCad project lives in the Phil-CIA/Pinball-Sw-Lamp-Matrix- repository on GitHub; these links point at the commit this page was built from.
Pinball Matrix board Rev 1: common questions
What microcontroller does the Pinball Matrix board Rev 1 use?
The Pinball Matrix board Rev 1 is built around the ESP32-C6-DEVKITM-AMAZON, from the ESP32 family.
How big is the Pinball Matrix board Rev 1?
The Pinball Matrix board Rev 1 measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pinball Matrix board Rev 1?
151 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pinball Matrix board Rev 1 design files?
From the Phil-CIA/Pinball-Sw-Lamp-Matrix- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pinball Matrix board Rev 1 design in my own project?
The repository has no license, so all rights stay with Phil-CIA. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pinball Matrix board Rev 1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Pinball-Sw-Lamp-Matrix-
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k