Pinball Matrix board Rev 1 routed power
Phil-CIA·Pinball-Sw-Lamp-Matrix-·hardware/Pinball Matrix board Rev 1_routed power.kicad_pcb
About the Pinball Matrix board Rev 1 routed power
Pinball Matrix board Rev 1 routed power is an open source ESP32 PCB design by Phil-CIA, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 148 components from 36 distinct parts.
Its main chip is the ESP32-C6-DEVKITM-AMAZON, from the ESP32 family. Other key parts include the LMV393, 74HC595D and VNQ7E100AJTR. By type, the board carries 70 resistors, 33 capacitors, 12 inductors, 10 diodes, 8 ICs and 4 connectors.
From the project
This project Build 8 row x 4 row lamp and a 8x 4 switch matrix scanner board For The Captain Fantastic - Home Edition Pinball Machine
This folder contains the KiCad project files and production exports for the pinball switch + lamp matrix board.
Main components on the Pinball Matrix board Rev 1 routed power
Pinball Matrix board Rev 1 routed power bill of materials (BOM)
148 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LMV393 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1, U2 |
| 1 | ESP32-C6-DEVKITM-AMAZON ESP32-C6-DevKitM-Amazon | ESP32-C6-DevKit-Amazon | U3 |
| 2 | 74HC595D Nexperia | SOIC-16_L9.9-W3.9-P1.27-LS6.0-BL | U4, U5 |
| 2 | VNQ7E100AJTR | SOP50P600X148-17N | U6, U7 |
| 1 | ~ | 0.96 inOLED display SSD1306 | U8 |
| 2 | B4B-XH-A JST | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1, J2 |
| 1 | CONN_01X13_PIN Conn_01x13_Pin | Molex_KK-396_A-41791-0013_1x13_P3.96mm_Vertical | J3 |
| 1 | CONN_01X10_PIN Conn_01x10_Pin | Molex_KK-396_A-41791-0010_1x10_P3.96mm_Vertical | J4 |
| 8 | TestPoint_Small | KEYSTONE_5015 | 3.3v, +5V, GPIO0, GPIO1, GPIO8, GPIO11, GPIO12, GPIO13 |
| 1 | C49166597 Polyfuse | R_LDR_7x6mm_P5.1mm_Vertical | F1 |
| 1 | C720075 Polyfuse | L_1206 | F2 |
| 1 | TestPoint | PinSocket_1x01_P2.54mm_Vertical | TP10 |
| 1 | H24VL10B hongjiacheng | D_DFN1006-2L | D1 |
| 1 | H3V3LD5B hongjiacheng | D_SOD-523 | D2 |
| 2 | C2297 Green Hubei KENTO Elec | D_0805 | D3, D9 |
| 1 | C2296 Yellow Hubei KENTO Elec | D_0805 | D4 |
| 4 | C37704 BAT54C,215 Nexperia | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | D5, D6, D7, D8 |
| 1 | H5VND5B hongjiacheng | D_SOD-523 | D10 |
| 7 | C1015 FerriteBead Sunlord | L_1206 | FB1, FB2, FB3, FB4, FB5, FB6, FB7 |
| 5 | IRLZ44NPBF IRLZ24 | TO-252-2 | L1, L2, L3, L4, L5 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 47UF 47uF Samsung Electro-Mechanics | C_1206 | C1, C2, C3, C4, C6 |
| 10 | 100NF 100nF YAGEO | C_0805 | C5, C12, C15, C17, C18, C19, C20, C21 +2 |
| 11 | 1NF 1nF Samsung Electro-Mechanics | C_0805 | C7, C8, C9, C10, C26, C27, C28, C29 +3 |
| 5 | 1UF 1uF Samsung Electro-Mechanics | C_0805 | C11, C13, C14, C24, C25 |
| 1 | 330UF 330uf | CP_Radial_D6.3mm_P2.50mm | C16 |
| 1 | 100UF 100uF Samsung Electro-Mechanics | C_1206 | C34 |
| 6 | 4.7kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R1, R2, R3, R4, R5, R6 |
| 4 | 47kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R7, R8, R9, R10 |
| 18 | 220Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R11, R17, R18, R19, R20, R30, R32, R34 +10 |
| 1 | 330Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R12 |
| 13 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R13, R14, R15, R16, R25, R26, R27, R29 +5 |
| 12 | 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R21, R22, R23, R24, R31, R33, R35, R37 +4 |
| 1 | 3kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R28 |
| 6 | 15kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R46, R47, R58, R60, R61, R63 |
| 2 | 1kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R59, R62 |
| 7 | 100Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R64, R65, R66, R67, R68, R69, R70 |
Pinball Matrix board Rev 1 routed power design files
The KiCad project lives in the Phil-CIA/Pinball-Sw-Lamp-Matrix- repository on GitHub; these links point at the commit this page was built from.
Pinball Matrix board Rev 1 routed power: common questions
What microcontroller does the Pinball Matrix board Rev 1 routed power use?
The Pinball Matrix board Rev 1 routed power is built around the ESP32-C6-DEVKITM-AMAZON, from the ESP32 family.
How big is the Pinball Matrix board Rev 1 routed power?
The Pinball Matrix board Rev 1 routed power measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pinball Matrix board Rev 1 routed power?
148 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pinball Matrix board Rev 1 routed power design files?
From the Phil-CIA/Pinball-Sw-Lamp-Matrix- repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Pinball Matrix board Rev 1 routed power design in my own project?
The repository has no license, so all rights stay with Phil-CIA. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pinball Matrix board Rev 1 routed power without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Pinball-Sw-Lamp-Matrix-
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k