ESP32-S3-Schematic and-PCB-Design
Philipgem-engineer·ESP32-S3-Schematic-and-PCB-Design·ESP32-S3 Project/PCB/ESP32-S3_Database/ESP32-S3_Bare_Chip.kicad_pcb
About the ESP32-S3-Schematic and-PCB-Design
ESP32-S3-Schematic and-PCB-Design is an open source ESP32 PCB design by Philipgem-engineer, published on GitHub. It is a 4-layer board measuring 27.5 × 69.2 mm, with 69 components from 37 distinct parts.
Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the AMS1117-3.3, TP4054-42-SOT25R and W25Q128JVSIQ. By type, the board carries 27 capacitors, 18 resistors, 7 diodes, 4 ICs, 4 inductors and 3 connectors.
It belongs with the iot & wireless designs in this gallery.
From the project
This repository contains a custom hardware of an ESP32-S3 microcontroller dev board. It includes the complete schematic and PCB layout, featuring essential supporting circuits.
Main components on the ESP32-S3-Schematic and-PCB-Design
ESP32-S3-Schematic and-PCB-Design bill of materials (BOM)
69 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | TP4054-42-SOT25R ~ | SOT-23-5 | U2 |
| 1 | ESP32-S3 | IC_ESP32-S3 | U3 |
| 1 | W25Q128JVSIQ | SOIC127P790X216-8N | U4 |
| 1 | AO3401A | SOT-23 | Q2 |
| 1 | 5YMA40000151SF40E1 ~ | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 2 | 61302211121 ~ | PinHeader_1x22_P2.54mm_Vertical | J1, J3 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | Antenna_Chip | Texas_SWRA117D_2.4GHz_Left | AE1 |
| 2 | TS-1088-AR02016 | SW_TS-1088-AR02016 | BOOT1, RESET1 |
| 1 | DEALON USB-TYPE-C-018 ~ | USB_TYPE_18 | JUSB1 |
| 1 | H3V3HD3B ESD 3.3V | D_SOD-323 | D2 |
| 1 | KT-0603R LED | LED_0603_1608Metric | D3 |
| 2 | 150060RS75000 LED | LED_0603_1608Metric | D4, D7 |
| 2 | H5VL10B ~ | H5VL10B | D5, D6 |
| 1 | SS14 | D_SMA | D8 |
| 1 | SDCL1005C24NJTDF 24 nH | L_0402_1005Metric | L3 |
| 1 | SDCL1608C2N0STDF 2 nH | L_0603_1608Metric | L4 |
| 1 | SDCL1005C4N7STDF 4.7nH | L_0402_1005Metric | L5 |
| 1 | TBD | L_0402_1005Metric | L6 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CL05B103KB5NNNC 10 nF | C_0402_1005Metric | C1 |
| 9 | CL05B104KO5NNNC 0.1uF | C_0402_1005Metric | C2, C3, C4, C5, C23, C24, C25, C26 +1 |
| 7 | CL05A106MQ5NUNC 10uF | C_0402_1005Metric | C9, C10, C11, C12, C17, C37, C38 |
| 2 | 4.7pF | C_0402_1005Metric | C15, C19 |
| 2 | 0402CG220J500NT 22pF | C_0402_1005Metric | C16, C18 |
| 3 | CL05A105KA5NQNC 1uF | C_0402_1005Metric | C20, C22, C28 |
| 2 | 0402CG220J500NT 15pF | C_0402_1005Metric | C29, C30 |
| 1 | 0402CG220J500NT TBD | C_0402_1005Metric | C31 |
| 2 | 0603WAF5101T5E 5.1K | R_0603_1608Metric | R2, R3 |
| 1 | 0603WAF1002T5E 10K | R_0603_1608Metric | R4 |
| 1 | 0402WGF2001TCE 2K | R_0402_1005Metric | R5 |
| 5 | 0402WGF0000TCE 0 | R_0402_1005Metric | R7, R8, R9, R10, R11 |
| 3 | 0402WGF4700TCE 499 | R_0402_1005Metric | R13, R16, R17 |
| 2 | 0402WGF1002TCE 10k | R_0402_1005Metric | R14, R15 |
| 1 | 0402WGF1001TCE 1K | R_0402_1005Metric | R18 |
| 1 | 0402WGF1003TCE 100K | R_0402_1005Metric | R21 |
| 2 | 0402WGF2003TCE 200K | R_0402_1005Metric | R22, R23 |
ESP32-S3-Schematic and-PCB-Design design files
The KiCad project lives in the Philipgem-engineer/ESP32-S3-Schematic-and-PCB-Design repository on GitHub; these links point at the commit this page was built from.
ESP32-S3-Schematic and-PCB-Design: common questions
What microcontroller does the ESP32-S3-Schematic and-PCB-Design use?
The ESP32-S3-Schematic and-PCB-Design is built around the ESP32-S3, from the ESP32 family.
How big is the ESP32-S3-Schematic and-PCB-Design?
The ESP32-S3-Schematic and-PCB-Design measures 27.5 × 69.2 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the ESP32-S3-Schematic and-PCB-Design?
69 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-S3-Schematic and-PCB-Design design files?
From the Philipgem-engineer/ESP32-S3-Schematic-and-PCB-Design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-S3-Schematic and-PCB-Design design in my own project?
The repository has no license, so all rights stay with Philipgem-engineer. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-S3-Schematic and-PCB-Design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k