6 open source boards using the TP4054-42-SOT25R
Real designs built with the TP4054-42-SOT25R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Neurband c
jlcjak
28.7 × 27 mm61 parts4LNo license32DC-DC-BOOST-CONVERTER
Philipgem-engineer
37.7 × 28.5 mm28 parts2LNo license2Corne ulp
FBIopeningUPP
302 × 125 mm132 parts2LNo license0ESP32
Export board
zeugmaster
60 × 110 mm127 parts4LCERN-OHL-S-2.00ESP32
ESP32-S3-Schematic and-PCB-Design
Philipgem-engineer
27.5 × 69.2 mm69 parts4LNo license0ESP32
Nucula v2
zeugmaster
60 × 110 mm127 parts4LCERN-OHL-S-2.00
How designs wire the TP4054-42-SOT25R
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TP4054-42-SOT25R connects to, and the resistors, capacitors and other passives placed on it.
- The VBAT pin has a decoupling capacitor on 4 of 5 designs, most often 10 µF (then 1 µF).
- The VDD pin has a capacitor to GND on 4 of 5 designs, most often 10 µF (then 1 µF).
- The PROG_5 pin has a resistor to GND on 4 of 5 designs, most often 10 kΩ (then 2 kΩ).
- The STAT pin has a series resistor on 3 of 5 designs, most often 3 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| STATpin 1 | Connected to: Signal 80% · not connected 20% |
|
| VSSpin 2 | Connected to: GND 80% · a signal 20% | — |
| VBATpin 3 | Connected to: VBAT 80% · a signal 20% |
|
| VDDpin 4 | Connected to: A connector 40% · 5V 20% |
|
| PROG_5pin 5 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Neurband c by jlcjak, DC-DC-BOOST-CONVERTER by Philipgem-engineer, Corne ulp by FBIopeningUPP and ESP32-S3-Schematic and-PCB-Design by Philipgem-engineer.
The TP4054-42-SOT25R in open source designs
The gallery holds 6 open source boards using the TP4054-42-SOT25R from 5 GitHub repositories; a typical one measures about 48.9 × 89.6 mm and carries around 98 components.
67% use four copper layers or more, and 33% carry an open source license.
The most starred is Neurband c by jlcjak.
Microcontrollers on boards using the TP4054-42-SOT25R
What boards using the TP4054-42-SOT25R are built for
TP4054-42-SOT25R: common questions
Where can I find a TP4054-42-SOT25R reference design?
Each of the 6 boards on this page is a real design using the TP4054-42-SOT25R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TP4054-42-SOT25R VBAT pin?
The VBAT pin has a decoupling capacitor on 4 of 5 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the TP4054-42-SOT25R.
How is the TP4054-42-SOT25R VDD pin connected?
The VDD pin has a capacitor to GND on 4 of 5 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the TP4054-42-SOT25R.
What resistor goes on the TP4054-42-SOT25R PROG_5 pin?
The PROG_5 pin has a resistor to GND on 4 of 5 designs, most often 10 kΩ (then 2 kΩ). Counted from the KiCad layouts of 5 open source designs using the TP4054-42-SOT25R.
Which microcontrollers do boards using the TP4054-42-SOT25R use?
Most are built on ESP32 (3) and Nordic nRF (1).
How big is a typical board using the TP4054-42-SOT25R?
The median is 48.9 × 89.6 mm, and 33% are two-layer designs.
What is the most popular open source board using the TP4054-42-SOT25R?
By GitHub stars, Neurband c by jlcjak, with 32 stars.
Can I simulate one of these boards using the TP4054-42-SOT25R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.