Integrated Debugger
PicoballoonLabs·Debug-Boards·Integrated Debugger/Integrated Debugger.kicad_pcb
About the Integrated Debugger PCB
Integrated Debugger is an open source STM32 PCB design by PicoballoonLabs, published on GitHub under the MIT license. It is a 6-layer board measuring 36.8 × 16.4 mm, with 72 components from 40 distinct parts.
Its main chip is the STM32F103CBU6, from the STM32 family. Other key parts include the USBULC6-2M6, TXB0106RGY, TPS22916CNLYFPR, MAX40200ANS+T and TLV76733DRVR. By type, the board carries 23 capacitors, 22 resistors, 7 ICs, 7 diodes, 5 connectors and 4 switches.
It belongs with the usb & debug tools designs in this gallery.
From the project
Hardware designs for the integrated debug probe, debug adapter, flex debug cables and RF VNA calibrator
This repository contains the hardware designs for our integrated debug probe, debug adapter, flex debug cables and RF calibration board.
Flex debug cable: Flexible flat cable that connects a debugger to the low-profile debug connector on the target board. Debug Adapter: SWD debug adapter board that breaks the target debug connector out to a standard debug host, with its own target power supply. Integrated Debugger: Integrated debug probe for flashing and debugging target hardware over SWD, with a UART bridge and switchable target power. It is hardware compatible with the Black Magic Debug…
Main components on the Integrated Debugger
Integrated Debugger bill of materials (BOM)
72 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBULC6-2M6 USBLC6-2P6 | XSON-6 | U1 |
| 1 | STM32F103CBU6 STM32F103CBUx | QFN-48 7x7mm | U2 |
| 1 | TXB0106RGY | PVQFN-N16 | U3 |
| 2 | TPS22916CNLYFPR TPS22916 | DSBGA-4 | U4, U7 |
| 1 | MAX40200ANS+T MAX40200 | WLP-4 | U5 |
| 1 | TLV76733DRVR TPS7A2633DRVR | WSON-6 2x2mm | U6 |
| 1 | DMN2991UDA-7B DMN31D5UDA-7B | X2-DFN0806-6 | Q1 |
| 1 | 1C208000BC0R 8MHz | Crystal 3225 | Y1 |
| 1 | GT-B0353MSV04-08B0201 B2B GT-B0353FSV06-08B0201 | B2B GT-B0353MSV04-08B0201 | J1 |
| 1 | TYPE-C-31-M-12 | TYPE-C-31-M-12 | J2 |
| 1 | FH28-10S-0.5SH(05) FPC socket 10P | FH28-10S-0.5SH(05) | J3 |
| 1 | 20021521-00010C1LF 20021521-00010T1LF | 20021521-00010T1LF | J4 |
| 1 | SM02B-SRSS-TB(LF)(SN) PWR | JST-SH-2P | J5 |
| 1 | HX TS152605A 160gf BOOT | Button SMD-4P,2.5x1.6mm | SW1 |
| 1 | YTS1T0161AWJ00 RESET | SMD-4P 4.2x3.2mm | SW2 |
| 1 | MINI MSK12CO2 AUXILIARY POWER | Switch MINI MSK12CO2 | SW3 |
| 1 | MINI MSK12CO2 Target Override | Switch MINI MSK12CO2 | SW4 |
| 1 | APHHS1005SURCK ERR | LED 0402 | D1 |
| 1 | APHHS1005LZGCK-V ACT | LED 0402 | D2 |
| 1 | APHHS1005LQBC/D-V SER | LED 0402 | D3 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PUSB3AB6Z | XSON-7 | D4 |
| 2 | APHHS1005SECK ORANGE | LED 0402 | D5, D6 |
| 1 | CFSH05-20L TR PBFREE | Diode SOD-882 | D7 |
| 2 | BLM15HD102SN1D 1000Ω | Inductor 0402 | FB1, FB2 |
| 1 | CL05A106MP5NUNC 10μF | Capacitor 0402 | C1 |
| 1 | CC0603KRX7RABB472 4.7nF | Capacitor 0603 | C2 |
| 2 | GRM035R60J475ME15D 4.7μF | Capacitor 0201 | C3, C21 |
| 3 | GRM033R61C105ME15D 1μF | Capacitor 0201 | C4, C17, C19 |
| 12 | GRM033R6YA104KE14D 100nF | Capacitor 0201 | C5, C6, C7, C8, C9, C11, C13, C14 +4 |
| 2 | CC0201GRNPO8BN150 15pF | Capacitor 0201 | C10, C12 |
| 2 | GRM033R61C105ME15D 1µF | Capacitor 0201 | C15, C22 |
| 3 | RC0201FR-071KL 1kΩ | Resistor 0201 | R1, R20, R21 |
| 3 | RC0201FR-074K7L 4.7kΩ | Resistor 0201 | R2, R4, R13 |
| 1 | AC0201JR-07220RL 220Ω | Resistor 0201 | R3 |
| 8 | ERJ1GNF1002C 10kΩ | Resistor 0201 | R5, R12, R14, R15, R16, R17, R18, R19 |
| 2 | RC0201FR-0722RL 22Ω | Resistor 0201 | R6, R7 |
| 1 | RC0201FR-071K5L 1.5kΩ | Resistor 0201 | R8 |
| 2 | 0201WMF5101TEE 5.1kΩ | Resistor 0201 | R9, R10 |
| 1 | ESR03EZPJ105 1MΩ | Resistor 0603 | R11 |
| 1 | YC248-JR-07100RL 100Ω | Resistor 0402x8 | RN1 |
Integrated Debugger design files
The KiCad project lives in the PicoballoonLabs/Debug-Boards repository on GitHub; these links point at the commit this page was built from.
Integrated Debugger: common questions
What microcontroller does the Integrated Debugger use?
The Integrated Debugger is built around the STM32F103CBU6, from the STM32 family.
How big is the Integrated Debugger PCB?
The Integrated Debugger measures 36.8 × 16.4 mm, has 6 copper layers and is 1.07048 mm thick.
How many components are on the Integrated Debugger?
72 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the Integrated Debugger design files?
From the PicoballoonLabs/Debug-Boards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Integrated Debugger design in my own project?
Yes, under the terms of its MIT license, which PicoballoonLabs chose for the repository.
Can I test firmware for the Integrated Debugger without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Debug-Boards
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k