5 open source boards using the TXB0106RGY

Real designs built with the TXB0106RGY, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TXB0106RGY

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TXB0106RGY connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCA pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The OE pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The VCCB pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF).
  • The VCCA pin has a resistor to GND on 3 of 5 designs, most often 100 kΩ.
A1pin 1Connected to: GND 60% · a signal 40%
VCCApin 2Connected to: A connector 60%, the microcontroller 60% · 2.8V 40%
  • Capacitor to GND on 100% · 100 nF (8), 1 µF (4), 4.7 µF (3)
  • Resistor to GND on 60% · 100 kΩ (3)
  • Series resistor on 60% · 100 kΩ (3)
A4pin 5Connected to: The microcontroller 80%
  • Series resistor on 60% · 100 kΩ (3)
OEpin 8Connected to: A connector 60%, the microcontroller 60% · 2.8V 40%
  • Capacitor to GND on 100% · 100 nF (8), 1 µF (4), 4.7 µF (3)
  • Resistor to GND on 60% · 100 kΩ (3)
  • Series resistor on 60% · 100 kΩ (3)
GNDpin 9, 17Connected to: GND 100%
VCCBpin 15Connected to: VDD 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (5), 4.7 µF (3)
B1pin 16Connected to: GND 60% · a signal 40%

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RoyalBlue54L-Feather by LordsBoards, NX-ISD by Ghost3379, Integrated Debugger by PicoballoonLabs and Kicad hub by JMcordobamendez.

The TXB0106RGY in open source designs

The gallery holds 5 open source boards using the TXB0106RGY from 5 GitHub repositories; a typical one measures about 58.4 × 22.9 mm and carries around 48 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is RoyalBlue54L-Feather by LordsBoards.

Microcontrollers on boards using the TXB0106RGY

TXB0106RGY: common questions

Where can I find a TXB0106RGY reference design?

Each of the 5 boards on this page is a real design using the TXB0106RGY. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TXB0106RGY VCCA pin connected?

The VCCA pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the TXB0106RGY.

How is the TXB0106RGY OE pin connected?

The OE pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the TXB0106RGY.

What decoupling capacitors do designs use on the TXB0106RGY VCCB pin?

The VCCB pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the TXB0106RGY.

What parts are used alongside the TXB0106RGY?

The BM15x, nPM1300-QEXX, NRF52833_QDXX, TPD3E001DRLR and W25Q16JVUXIQ appear in the most repositories here.

Which microcontrollers do boards using the TXB0106RGY use?

Most are built on Nordic nRF (3), ESP32 (1) and STM32 (1).

How big is a typical board using the TXB0106RGY?

The median is 58.4 × 22.9 mm, and 0% are two-layer designs.

What is the most popular open source board using the TXB0106RGY?

By GitHub stars, RoyalBlue54L-Feather by LordsBoards, with 31 stars.

Can I simulate one of these boards using the TXB0106RGY before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part