Debug Adapter
PicoballoonLabs·Debug-Boards·Debug Adapter/Debug Adapter.kicad_pcb
About the Debug Adapter PCB
Debug Adapter is an open source PCB design by PicoballoonLabs, published on GitHub under the MIT license. It is a 2-layer board measuring 20 × 38.1 mm, with 34 components from 20 distinct parts.
Other key parts include the TPS22914BYFPR, CP2102N-A02-GQFN24R and TPS7A2633DRVR. By type, the board carries 11 capacitors, 9 resistors, 5 ICs, 5 connectors, 2 switches and 2 diodes.
It belongs with the usb & debug tools designs in this gallery.
From the project
Hardware designs for the integrated debug probe, debug adapter, flex debug cables and RF VNA calibrator
This repository contains the hardware designs for our integrated debug probe, debug adapter, flex debug cables and RF calibration board.
Flex debug cable: Flexible flat cable that connects a debugger to the low-profile debug connector on the target board. Debug Adapter: SWD debug adapter board that breaks the target debug connector out to a standard debug host, with its own target power supply. Integrated Debugger: Integrated debug probe for flashing and debugging target hardware over SWD, with a UART bridge and switchable target power. It is hardware compatible with the Black Magic Debug…
Main components on the Debug Adapter
Debug Adapter bill of materials (BOM)
34 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | TPS22914BYFPR TPS22914 | DSBGA-4 | U1, U3, U5 |
| 1 | CP2102N-A02-GQFN24R | QFN-24 4x4mm | U2 |
| 1 | TPS7A2633DRVR | WSON-6 2x2mm | U4 |
| 1 | TYPE-C-31-M-12 | TYPE-C-31-M-12 | J1 |
| 1 | 20021521-00010T1LF SWD | 20021521-00010T1LF | J2 |
| 1 | 20021521-00010T1LF | 20021521-00010T1LF | J3 |
| 1 | FPC-05F-10PH20 FPC socket 10P | FPC connector FPC-05F-10PH20 | J4 |
| 1 | 532610271 PWR | MOLEX 532610271 | J5 |
| 1 | GT-TC029B-H025-L1N RST | Button GT-TC029B-H025-L1N | SW1 |
| 1 | EM-02KP | EM-02KP | SW2 |
| 1 | PMEG3005EL,315 | Diode SOD-882 | D1 |
| 1 | XL-1608SURC-06 RED | LED 0603 | D2 |
| 1 | GRM155R60J106ME44D 10μF | Capacitor 0402 | C1 |
| 8 | GRM033R61A104KE15D 100nF | Capacitor 0201 | C2, C3, C4, C5, C7, C8, C10, C11 |
| 2 | GRM033R60J105MEA2D 1μF | Capacitor 0201 | C6, C9 |
| 4 | ERJ1GNF1002C 10kΩ | Resistor 0201 | R1, R6, R8, R9 |
| 1 | RC0201FR-0720KL 20kΩ | Resistor 0201 | R2 |
| 2 | RC0201FR-075K1L 5.1kΩ | Resistor 0201 | R3, R4 |
| 1 | ERJ1GNF1001C 1kΩ | Resistor 0201 | R5 |
| 1 | ERJ1GNF3300C 330Ω | Resistor 0201 | R7 |
Debug Adapter design files
The KiCad project lives in the PicoballoonLabs/Debug-Boards repository on GitHub; these links point at the commit this page was built from.
Debug Adapter: common questions
How big is the Debug Adapter PCB?
The Debug Adapter measures 20 × 38.1 mm, has 2 copper layers and is 0.9154 mm thick.
How many components are on the Debug Adapter?
34 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Debug Adapter design files?
From the PicoballoonLabs/Debug-Boards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Debug Adapter design in my own project?
Yes, under the terms of its MIT license, which PicoballoonLabs chose for the repository.
More boards in Debug-Boards
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389