Fire-40-c

piersfinlayson·one-rom·hardware/pcb/verified/fire-40-c/fire-40-c.kicad_pcb

Fire-40-c PCB layout, top view — open source RP2040/RP2350 board by piersfinlayson

About the Fire-40-c PCB

Fire-40-c is an open source RP2040/RP2350 PCB design by piersfinlayson, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 18.8 × 51.9 mm, with 49 components from 22 distinct parts.

Its main chip is the RP2354B, from the RP2040/RP2350 family. Other key parts include the AP2112K-3.3, USBLC6-2P6 and W25Q16JVSS. By type, the board carries 23 capacitors, 12 resistors, 5 ICs, 4 diodes, 3 connectors and 1 crystal.

It belongs with the retro computing designs in this gallery.

From the project

The most flexible and powerful ROM replacement for retro systems - using a Raspberry Pi RP2350 microcontroller.

An upright USB-C variant of fire-40-b - the connector sticks up out of the board rather than lying flat, which helps where there is too little room at the edge of One ROM to plug in a cable. It is not preferred over fire-40-b - the two connector orientations are complementary.

Has components on both sides of the board.

Main components on the Fire-40-c

Fire-40-c bill of materials (BOM)

49 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2354B
U1
1
Conn_02x20_Counter_Clockwise
U2
1
AP2112K-3.3
U3
1
USBLC6-2P6
U4
1
W25Q16JVSS
U5
1
CRYSTAL_GND24
Crystal_GND24
Y1
1
MC-118LD-H65
J1
1
Conn_02x04_Odd_Even
J2
1
Conn_01x02_Pin
J3
1
C2286
LED_Small
D1
2
1N5819WS
D2, D3
1
XL-1010RGBC-WS2812B
D4
1
3.3U
3.3u
L1
7
4.7UF
4.7uF
C1, C2, C3, C7, C13, C15, C23
12
0.1UF
0.1uF
C4, C5, C6, C8, C9, C10, C11, C12 +4
2
4.7UF
4.7uF
C16, C17
2
15PF
15pF
C18, C19
4
10K
R1, R3, R7, R8
4
1K
R2, R5, R6, R13
1
33R
R4
Show 2 more
QtyPartRefs
2
5K1
R9, R10
1
C17168
0R
R12

Fire-40-c design files

The KiCad project lives in the piersfinlayson/one-rom repository on GitHub; these links point at the commit this page was built from.

Fire-40-c: common questions

What microcontroller does the Fire-40-c use?

The Fire-40-c is built around the RP2354B, from the RP2040/RP2350 family.

How big is the Fire-40-c PCB?

The Fire-40-c measures 18.8 × 51.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Fire-40-c?

49 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Fire-40-c design files?

From the piersfinlayson/one-rom repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Fire-40-c design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which piersfinlayson chose for the repository.

Can I test firmware for the Fire-40-c without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in one-rom

Similar boards