Dcdc
About the Dcdc PCB
Dcdc is an open source PCB design by PinkFluffyUnic0rn, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 19.5 × 19 mm, with 7 components from 6 distinct parts.
Other key parts include the Comment. By type, the board carries 3 capacitors, 1 IC, 1 diode, 1 inductor and 1 resistor.
It belongs with the robotics & motion, rf & radio and sensors designs in this gallery.
From the project
Flight controller for a small quadcopter
STM32 Flight controller =========================
DIY quadcopter flight controller from scratch, two boards and software.
Project structure is described on wiki page.
Software part implements all basic quadcopter flight control features. Configuration commands and settings are on wiki page.
Rotation speed stabilization using gyroscope readings. Attitude stabilization using accelerometer/gyroscope readings. Yaw stabilization using gyroscope readings. Yaw stabilization using magnetometer/gyroscope readings. Acceleration stabilization using accelerometer readings. Altitude stabilization…
Main components on the Dcdc
Dcdc bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Comment | tps5430 | u1 |
| 1 | Comment | SS34 | d1 |
| 1 | Comment | inductor | l1 |
| 2 | Comment | 0603 | c1, c2 |
| 1 | Comment | 1206 | c3 |
| 1 | Comment | 0603 | r2 |
Dcdc design files
The KiCad project lives in the PinkFluffyUnic0rn/stm32flight repository on GitHub; these links point at the commit this page was built from.
Dcdc: common questions
How big is the Dcdc PCB?
The Dcdc measures 19.5 × 19 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dcdc?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dcdc design files?
From the PinkFluffyUnic0rn/stm32flight repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Dcdc design in my own project?
Yes, under the terms of its GPL-3.0 license, which PinkFluffyUnic0rn chose for the repository.
More boards in stm32flight
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k