3x3 Minibadge Holder
3x3 Minibadge Holder is an open source PCB design by Pips801: a 2-layer, 80.4 × 73 mm board with 20 components (17 distinct parts). It is built around the AP2112K-3.3, 74HC4060D, TPM8837C.
SAINTCON Minibadges
Built around
Parts list
20 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | 74HC4060D | 74LV4060D118 | U2 |
| 1 | TPM8837C | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | C136659 ON/OFF | SW_SPDT_PCM12 | SW1 |
| 1 | C136659 CLOCK SPEED | SW_SPDT_PCM12 | SW2 |
| 1 | TYPE-C-31-M-17 | TYPEC31M17 | USB1 |
| 1 | LED_3.3 | LED_1206_3216Metric_ReverseMount_Hole1.8x2.4mm | D1 |
| 1 | C5356080 LED_VBUS | LED_1206_3216Metric_ReverseMount_Hole1.8x2.4mm | D2 |
| 1 | C5356080 LED_CLK | LED_1206_3216Metric_ReverseMount_Hole1.8x2.4mm | D3 |
| 2 | 10UF 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 1 | 0.1UF 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 0.01UF 0.01uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 2 | 10Ω | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R6 |
| 1 | 130Ω | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 2 | 5.1kΩ | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R7 |
| 1 | 8.45kΩ | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 20kΩ | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
More boards in minibadges
2x2 Minibadge Holder USB-C
49 × 49 mm19 parts2LNo license7
Circle Minibadge Display
176.1 × 176.1 mm12 parts4LNo license7
AVR/ArduinoATtiny 816/1616 Minibadge Devboard
19 × 16.8 mm12 parts2LNo license7
Crown Burger Minibadge
27.5 × 29.9 mm11 parts2LNo license7
Bible Study at ABGs
20.3 × 20.3 mm6 parts2LNo license7
Microbadge Minibadge
20 × 20 mm6 parts4LNo license7
I almost DIED at the CheckPoint party
20.3 × 20.3 mm5 parts2LNo license7
ESP32Panelized
67 × 72.3 mm4 parts2LNo license7
Camera
25.8 × 19 mm3 parts2LNo license7