2x2 Minibadge Holder USB-C
Pips801·minibadges·2x2 Minibadge Display/Minibadge Holder USB-C.kicad_pcb
About the 2x2 Minibadge Holder USB-C PCB
2x2 Minibadge Holder USB-C is an open source PCB design by Pips801, published on GitHub. It is a 2-layer board measuring 49 × 49 mm, with 19 components from 17 distinct parts.
Other key parts include the AP2112K-3.3, 74HC4060 and TPM8837C. By type, the board carries 7 resistors, 4 capacitors, 3 ICs, 3 diodes, 1 connector and 1 switch.
From the project
SAINTCON Minibadges
Main components on the 2x2 Minibadge Holder USB-C
2x2 Minibadge Holder USB-C bill of materials (BOM)
19 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | 74HC4060 | SSOP-16_5.3x6.2mm_P0.65mm | U2 |
| 1 | TPM8837C | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | TYPE-C-31-M-17 | TYPEC31M17 | J1 |
| 1 | SW_SP3T | SW_SP3T_PCM13 | SW1 |
| 1 | LED_3.3 | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | LED_VBUS | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | LED_CLK | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 2 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 1 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 0.01uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | SCR1206F100R 10Ω VO(翔胜) | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 130 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 2 | 5.1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R7 |
| 1 | 8.45kΩ | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 20k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 10Ω | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
2x2 Minibadge Holder USB-C design files
The KiCad project lives in the Pips801/minibadges repository on GitHub; these links point at the commit this page was built from.
2x2 Minibadge Holder USB-C: common questions
How big is the 2x2 Minibadge Holder USB-C PCB?
The 2x2 Minibadge Holder USB-C measures 49 × 49 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 2x2 Minibadge Holder USB-C?
19 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 2x2 Minibadge Holder USB-C design files?
From the Pips801/minibadges repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 2x2 Minibadge Holder USB-C design in my own project?
The repository has no license, so all rights stay with Pips801. Use it as a reference, and ask the author before reusing the design.
More boards in minibadges
3x3 Minibadge Holder
Pips801
80.4 × 73 mm20 parts2LNo license7Circle Minibadge Display
Pips801
176.1 × 176.1 mm12 parts4LNo license7AVR/Arduino
ATtiny 816/1616 Minibadge Devboard
Pips801
19 × 16.8 mm12 parts2LNo license7Crown Burger Minibadge
Pips801
27.5 × 29.9 mm11 parts2LNo license7Microbadge Minibadge
Pips801
20 × 20 mm6 parts4LNo license7Bible Study at ABGs
Pips801
20.3 × 20.3 mm6 parts2LNo license7I almost DIED at the CheckPoint party
Pips801
20.3 × 20.3 mm5 parts2LNo license7ESP32
Panelized
Pips801
67 × 72.3 mm4 parts2LNo license7Camera
Pips801
25.8 × 19 mm3 parts2LNo license7