Microbadge Minibadge
Pips801·minibadges·Microbadge Minibadge/Microbadge Minibadge.kicad_pcb
About the Microbadge Minibadge PCB
Microbadge Minibadge is an open source PCB design by Pips801, published on GitHub. It is a 4-layer board measuring 20 × 20 mm, with 6 components from 1 distinct parts.
It belongs with the rf & radio designs in this gallery.
From the project
SAINTCON Minibadges
Supports: XIAO ESP32-S3 + Wio-SX1262 (Meshtastic) XIAO ESP32-C6 (Thread/Zigbee) XIAO ESP32-S3 Sense (Camera/SD card) Other XIAO ESPs are untested, but if the pinout is the same, it will work.
Possible projects: Meshtastic node minibadge Zigbee node minibadge Picture/video recorder minibadge LED matrix minibadge GNSS minibadge Temp/humidity/light sensor minibadge * mmWave sensor minibadge
Microbadge Minibadge bill of materials (BOM)
6 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | Microbadge V2 Full | Microbadge_V2_full_round_socket_reflective_nosilk_GND | MCB1, MCB2, MCB3, MCB4, MCB5, MCB6 |
Microbadge Minibadge design files
The KiCad project lives in the Pips801/minibadges repository on GitHub; these links point at the commit this page was built from.
Microbadge Minibadge: common questions
How big is the Microbadge Minibadge PCB?
The Microbadge Minibadge measures 20 × 20 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Microbadge Minibadge?
6 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Microbadge Minibadge design files?
From the Pips801/minibadges repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Microbadge Minibadge design in my own project?
The repository has no license, so all rights stay with Pips801. Use it as a reference, and ask the author before reusing the design.
More boards in minibadges
3x3 Minibadge Holder
Pips801
80.4 × 73 mm20 parts2LNo license72x2 Minibadge Holder USB-C
Pips801
49 × 49 mm19 parts2LNo license7Circle Minibadge Display
Pips801
176.1 × 176.1 mm12 parts4LNo license7AVR/Arduino
ATtiny 816/1616 Minibadge Devboard
Pips801
19 × 16.8 mm12 parts2LNo license7Crown Burger Minibadge
Pips801
27.5 × 29.9 mm11 parts2LNo license7Bible Study at ABGs
Pips801
20.3 × 20.3 mm6 parts2LNo license7I almost DIED at the CheckPoint party
Pips801
20.3 × 20.3 mm5 parts2LNo license7ESP32
Panelized
Pips801
67 × 72.3 mm4 parts2LNo license7Camera
Pips801
25.8 × 19 mm3 parts2LNo license7
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568