Panelized

Pips801·minibadges·XIAO ESP minibadge/panelized.kicad_pcb

Panelized PCB layout, top view — open source ESP32 board by Pips801

About the Panelized PCB

Panelized is an open source ESP32 PCB design by Pips801, published on GitHub. It is a 2-layer board measuring 67 × 72.3 mm, with 4 components from 3 distinct parts.

Its main chip is the XIAO-ESP32-S3-DIP, from the ESP32 family. By type, the board carries 2 diodes and 1 IC.

It belongs with the iot & wireless, rf & radio and displays & leds designs in this gallery.

From the project

SAINTCON Minibadges

Supports: XIAO ESP32-S3 + Wio-SX1262 (Meshtastic) XIAO ESP32-C6 (Thread/Zigbee) XIAO ESP32-S3 Sense (Camera/SD card) Other XIAO ESPs are untested, but if the pinout is the same, it will work.

Possible projects: Meshtastic node minibadge Zigbee node minibadge Picture/video recorder minibadge LED matrix minibadge GNSS minibadge Temp/humidity/light sensor minibadge * mmWave sensor minibadge

Panelized, from the project README
From the project README

Main components on the Panelized

Panelized bill of materials (BOM)

4 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-S3-DIP
U1
1
MiniBadge_Simple
MB1
2
10V
D1, D2

Panelized design files

The KiCad project lives in the Pips801/minibadges repository on GitHub; these links point at the commit this page was built from.

Panelized: common questions

What microcontroller does the Panelized use?

The Panelized is built around the XIAO-ESP32-S3-DIP, from the ESP32 family.

How big is the Panelized PCB?

The Panelized measures 67 × 72.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Panelized?

4 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Panelized design files?

From the Pips801/minibadges repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Panelized design in my own project?

The repository has no license, so all rights stay with Pips801. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Panelized without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in minibadges

Similar boards