Circle Minibadge Display

Pips801·minibadges·Circle Minibadge Display/Circle Minibadge Display.kicad_pcb

Circle Minibadge Display PCB layout, top view — open source board by Pips801

About the Circle Minibadge Display PCB

Circle Minibadge Display is an open source PCB design by Pips801, published on GitHub. It is a 4-layer board measuring 176.1 × 176.1 mm, with 12 components from 1 distinct parts.

It belongs with the rf & radio and displays & leds designs in this gallery.

From the project

SAINTCON Minibadges

Supports: XIAO ESP32-S3 + Wio-SX1262 (Meshtastic) XIAO ESP32-C6 (Thread/Zigbee) XIAO ESP32-S3 Sense (Camera/SD card) Other XIAO ESPs are untested, but if the pinout is the same, it will work.

Possible projects: Meshtastic node minibadge Zigbee node minibadge Picture/video recorder minibadge LED matrix minibadge GNSS minibadge Temp/humidity/light sensor minibadge * mmWave sensor minibadge

Circle Minibadge Display, from the project README
From the project README

Circle Minibadge Display bill of materials (BOM)

12 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
12
MiniBadge_Simple
MB1, MB2, MB3, MB4, MB5, MB6, MB7, MB8 +4

Circle Minibadge Display design files

The KiCad project lives in the Pips801/minibadges repository on GitHub; these links point at the commit this page was built from.

Circle Minibadge Display: common questions

How big is the Circle Minibadge Display PCB?

The Circle Minibadge Display measures 176.1 × 176.1 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Circle Minibadge Display?

12 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Circle Minibadge Display design files?

From the Pips801/minibadges repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Circle Minibadge Display design in my own project?

The repository has no license, so all rights stay with Pips801. Use it as a reference, and ask the author before reusing the design.

More boards in minibadges

Similar boards