ATtiny 816/1616 Minibadge Devboard
Pips801·minibadges·ATTiny Development Minibadge/ATTiny Development Minibadge.kicad_pcb
About the ATtiny 816/1616 Minibadge Devboard PCB
ATtiny 816/1616 Minibadge Devboard is an open source AVR/Arduino PCB design by Pips801, published on GitHub. It is a 2-layer board measuring 19 × 16.8 mm, with 12 components from 11 distinct parts.
Its main chip is the ATtiny816/1616-M, from the AVR/Arduino family. By type, the board carries 4 connectors, 3 diodes, 3 resistors, 1 IC and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
SAINTCON Minibadges
In the Arduino IDE, make the following changes Programmer: SerialUPDI - SLOW 57600 Baud Chip: ATtiny816 * Clock: 10Mhz Internal
You should then be able to do Sketch -> Upload Using Programmer if your UPDI programmer is connected to UPDI, 3v, and GND (all next to eachother)
Main components on the ATtiny 816/1616 Minibadge Devboard
ATtiny 816/1616 Minibadge Devboard bill of materials (BOM)
12 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATtiny816/1616-M | VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U1 |
| 1 | SPI | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | I2C | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | DAC | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | USART | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 1 | 20V | D_0603_1608Metric | D3 |
| 1 | 0.1uF | C_0603_1608Metric | C1 |
| 1 | SCR1206F100R R VO(翔胜) | R_0603_1608Metric | R1 |
| 1 | R | R_0603_1608Metric | R2 |
| 1 | 10k | R_0603_1608Metric | R3 |
ATtiny 816/1616 Minibadge Devboard design files
The KiCad project lives in the Pips801/minibadges repository on GitHub; these links point at the commit this page was built from.
ATtiny 816/1616 Minibadge Devboard: common questions
What microcontroller does the ATtiny 816/1616 Minibadge Devboard use?
The ATtiny 816/1616 Minibadge Devboard is built around the ATtiny816/1616-M, from the AVR/Arduino family.
How big is the ATtiny 816/1616 Minibadge Devboard PCB?
The ATtiny 816/1616 Minibadge Devboard measures 19 × 16.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ATtiny 816/1616 Minibadge Devboard?
12 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ATtiny 816/1616 Minibadge Devboard design files?
From the Pips801/minibadges repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ATtiny 816/1616 Minibadge Devboard design in my own project?
The repository has no license, so all rights stay with Pips801. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ATtiny 816/1616 Minibadge Devboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in minibadges
3x3 Minibadge Holder
Pips801
80.4 × 73 mm20 parts2LNo license72x2 Minibadge Holder USB-C
Pips801
49 × 49 mm19 parts2LNo license7Circle Minibadge Display
Pips801
176.1 × 176.1 mm12 parts4LNo license7Crown Burger Minibadge
Pips801
27.5 × 29.9 mm11 parts2LNo license7Microbadge Minibadge
Pips801
20 × 20 mm6 parts4LNo license7Bible Study at ABGs
Pips801
20.3 × 20.3 mm6 parts2LNo license7I almost DIED at the CheckPoint party
Pips801
20.3 × 20.3 mm5 parts2LNo license7ESP32
Panelized
Pips801
67 × 72.3 mm4 parts2LNo license7Camera
Pips801
25.8 × 19 mm3 parts2LNo license7
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k