LowJungle

playlogo·LowJungle·pcb/LowJungle.kicad_pcb

LowJungle PCB layout, top view — open source ESP32 board by playlogo

About the LowJungle PCB

LowJungle is an open source ESP32 PCB design by playlogo, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 371.5 × 133.4 mm, with 300 components from 27 distinct parts.

Its main chip is the C2913204, from the ESP32 family. Other key parts include the GT-USB-7010ASV and SL2.1A. By type, the board carries 94 LEDs, 85 diodes, 16 capacitors, 6 resistors, 3 ICs and 3 connectors.

It belongs with the keyboards and iot & wireless designs in this gallery.

From the project

A custom low profile 65% keyboard (w/ PCB & Case)

- Hot swappable sockets - Per key RGB backlight - Wifi & BLE (but no battery) - Integrated 3 port USB Hub

- Onshape: Case - Keyboard Layout Editor: Layout

- Schematic - No relevant ERC & DRC errors - Size: 371.48mm x 133.35mm - VCC for backlight LEDs can be controlled by the ESP32 using 2 mosfets - Used libraries: - Marbastlib, needs to be installed as plugin - easyeda2kicad, needs to be installed separately, used for downloading LCSC schematics & footprints - Download C2913204, C192893, C2891732, C778164, C2988369, C8547, C503996, C82942 using easyeda2kicad --full --lcscid= (one-by-one…

LowJungle, from the project README
From the project README

Main components on the LowJungle

LowJungle bill of materials (BOM)

300 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C2913204
ESP32-S3-WROOM-1(N8R2)
U1
1
GT-USB-7010ASV
U2
1
SL2.1A
U3
1
C8547
CJ2301 S1
Q1
1
SI2302_C2891732
Q2
1
JTAG
J1
1
3.3V
J2
1
5V
J3
71
KS33_SW_HS
CH1, CH2, CH7, CH8, CH9, CH10, CH12, CH13 +63
1
KS33_SW_HS
CH3
1
KS33_SW_HS
CH4
8
KS33_SW_HS
CH5, CH6, CH11, CH17, CH66, CH71, CH72, CH73
1
KS33_SW_HS
CH23
1
KS33_SW_HS
CH68
1
KS33_SW_HS
CH69
1
KS33_SW_HS
CH70
1
ME6211C33M5G-N
LDO1
2
GT-TC029A-H020-L1N
SW2, SW3
2
KH-AF90DIP-112
USB1, USB2
1
DNP
USB3
Show 7 more
QtyPartRefs
94
KS33_SK6812MINI-E
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +86
85
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +77
10
10UF
10uF
C1, C2, C3, C4, C5, C6, C8, C12 +2
3
100NF
100nF
C7, C10, C11
3
1UF
1uF
C9, C15, C16
3
10K
10k
R1, R2, R5
3
5.1K
5.1k
R3, R4, R6

LowJungle design files

The KiCad project lives in the playlogo/LowJungle repository on GitHub; these links point at the commit this page was built from.

LowJungle: common questions

What microcontroller does the LowJungle use?

The LowJungle is built around the C2913204, from the ESP32 family.

How big is the LowJungle PCB?

The LowJungle measures 371.5 × 133.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LowJungle?

300 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LowJungle design files?

From the playlogo/LowJungle repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LowJungle design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which playlogo chose for the repository.

Can I test firmware for the LowJungle without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards