Elec Ventouse 2d
pollen-robotics·elec_Ventouse_2d
About the Elec Ventouse 2d PCB
Elec Ventouse 2d is an open source PCB design by pollen-robotics, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 50 × 65 mm, with 121 components from 34 distinct parts.
Other key parts include the TMC6100-LA, AP63203, AP63205 and AD8418. By type, the board carries 49 capacitors, 36 resistors, 12 transistors, 8 ICs, 6 connectors and 6 diodes.
It belongs with the robotics & motion designs in this gallery.
From the project
Power board for 2 BLDC motors. Paired with elec_Poulpe_2d
"Ventouse2d" is build from "Themis" as it aims on driving Orbita 2 Dofs. It is paired with boards "Poulpe2d" that controls 2 BLDC Motors.

Main components on the Elec Ventouse 2d
Elec Ventouse 2d bill of materials (BOM)
121 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TMC6100-LA | QFN37_7X7_TRI | U1, U7 |
| 1 | AP63203 | TSOT-23-6 | U2 |
| 1 | AP63205 | TSOT-23-6 | U3 |
| 4 | AD8418 | SOIC-8_3.9x4.9mm_P1.27mm | U4, U5, U6, U8 |
| 12 | BSZ034N04LS | PQFN_3.3x3.3mm_-_PG-TDSON-8_FL | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +4 |
| 1 | MicroFit2 | Micro-Fit_43650-0210_Horizontal | J1 |
| 2 | SlimStack Plug 4mm | Molex_SlimStack_539160208 | J2, J6 |
| 2 | MicroFit 3 | Micro-Fit_43650-0310_Horizontal | J3, J4 |
| 1 | XT30 | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J5 |
| 2 | 10k_NTC | R_0603_1608Metric | TH1, TH2 |
| 3 | TVS diode | D_SMA | D1, D2, D3 |
| 2 | Red | LED_0603_1608Metric | D5, D6 |
| 1 | BAT30KFILM | D_SOD-523 | D7 |
| 2 | 6,8u 2A | L_Bourns_SRN6045TA | L1, L2 |
| 7 | 470n 50V | C_0603_1608Metric | C1, C13, C25, C27, C29, C30, C31 |
| 2 | 220u 35V | CP_Elec_10x10.5 | C2, C3 |
| 8 | 100n 50V | C_0402_1005Metric | C5, C6, C11, C16, C17, C20, C22, C45 |
| 10 | 100n 6V3 | C_0402_1005Metric | C7, C12, C15, C28, C32, C34, C37, C46 +2 |
| 4 | 2u2 10V | C_0603_1608Metric | C8, C9, C21, C26 |
| 1 | 10u 35V | CP_Elec_6.3x7.7 | C10 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 2u2 50V | C_1210_3225Metric | C14, C19, C33, C51, C52, C53 |
| 2 | 22n 100V | C_0603_1608Metric | C18, C39 |
| 4 | 22u 6V3 | C_0603_1608Metric | C23, C24, C42, C43 |
| 4 | 2n2 50V | C_0402_1005Metric | C35, C36, C40, C41 |
| 1 | 10n 6V3 | C_0402_1005Metric | C38 |
| 3 | 620m | R_2512W_Pad2.10x3.15mm | R1, R2, R3 |
| 7 | 4k7 | R_0402_1005Metric | R4, R17, R19, R20, R25, R29, R34 |
| 12 | 10R | R_0402_1005Metric | R5, R7, R8, R9, R11, R13, R14, R35 +4 |
| 4 | 10m | Res_1206_ERJ8CWFR010V | R6, R10, R18, R24 |
| 2 | 22K | R_0402_1005Metric | R12, R16 |
| 2 | 470R | R_0402_1005Metric | R15, R46 |
| 4 | 1k | R_0402_1005Metric | R21, R22, R27, R28 |
| 1 | 75k | R_0402_1005Metric | R23 |
| 1 | 150R | R_0402_1005Metric | R26 |
Elec Ventouse 2d design files
The KiCad project lives in the pollen-robotics/elec_Ventouse_2d repository on GitHub; these links point at the commit this page was built from.
Elec Ventouse 2d: common questions
How big is the Elec Ventouse 2d PCB?
The Elec Ventouse 2d measures 50 × 65 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Elec Ventouse 2d?
121 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Elec Ventouse 2d design files?
From the pollen-robotics/elec_Ventouse_2d repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Elec Ventouse 2d design in my own project?
Yes, under the terms of its Apache-2.0 license, which pollen-robotics chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979