Carrier

polya2005·IoT-RGB-matrix·pcb/Carrier/Carrier.kicad_pcb

Carrier PCB layout, top view — open source ESP32 board by polya2005

About the Carrier PCB

Carrier is an open source ESP32 PCB design by polya2005, published on GitHub under the MIT license. It is a 2-layer board measuring 110.5 × 77.5 mm, with 9 components from 4 distinct parts.

Its main chip is the ESP32-C6-DevKitC-1, from the ESP32 family. Other key parts include the Tang_Nano_9k_board. By type, the board carries 7 connectors and 2 ICs.

It belongs with the iot & wireless and displays & leds designs in this gallery.

From the project

- Sending custom images (and animations) over WiFi to the display. - Automatically generate a QR code for display (one application is to rickroll people) - Serving as a "status" display like date/time, weather, etc.

- Sending custom images (and animations) over WiFi to the display. - Automatically generate a QR code for display (one application is to rickroll people) - Serving as a "status" display like date/time, weather, etc.

- 40x40 RGB LED matrix, which is broken down into 25 PCBs of 8x8 matrix - A control board, which is likely a Raspberry Pi Zero W

Main components on the Carrier

ESP32-C6-DevKitC-1Tang_Nano_9k_board

Carrier bill of materials (BOM)

9 components, 4 distinct parts.

QtyPartRefs
1
ESP32-C6-DevKitC-1
U1
1
Tang_Nano_9k_board
U2
5
Conn_01x10_Pin
J1, J2, J3, J4, J5
2
Conn_01x16_Socket
J6, J7

Carrier design files

The KiCad project lives in the polya2005/IoT-RGB-matrix repository on GitHub; these links point at the commit this page was built from.

Carrier: common questions

What microcontroller does the Carrier use?

The Carrier is built around the ESP32-C6-DevKitC-1, from the ESP32 family.

How big is the Carrier PCB?

The Carrier measures 110.5 × 77.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Carrier?

9 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Carrier design files?

From the polya2005/IoT-RGB-matrix repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Carrier design in my own project?

Yes, under the terms of its MIT license, which polya2005 chose for the repository.

Can I test firmware for the Carrier without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in IoT-RGB-matrix

Similar boards