Exoskeleton-Glove main

Prajwalnayak2506·Exoskeleton-Glove-main·pcb/PCB1/PCB.kicad_pcb

Exoskeleton-Glove main PCB layout, top view — open source board by Prajwalnayak2506

About the Exoskeleton-Glove main PCB

Exoskeleton-Glove main is an open source PCB design by Prajwalnayak2506, published on GitHub. It is a 2-layer board measuring 65 × 112.9 mm, with 11 components from 7 distinct parts.

Other key parts include the BOB-09056, YAAJ_DCDC_StepDown_LM2596 and SC0918. By type, the board carries 6 connectors, 3 ICs, 1 module and 1 diode.

It belongs with the power & battery designs in this gallery.

From the project

In a nutshell, our design collects data from rotary potentiometers serially, sends them to Rpi pico which in turn quickly cycles through the available channels in a round robin fashion while powering everything using an LM2596 Buck converter

In a nutshell, our design collects data from rotary potentiometers serially, sends them to Rpi pico which in turn quickly cycles through the available channels in a round robin fashion while powering everything using an LM2596 Buck converter

Our PCB design has the ability to support upto 24 rotary potentiometers due to which we have 24 ports connected to ground and 24 ports connected to VCC(3.3V output from sensor). We connected these to the 3.3v supply of Pico instead of our main power supply which is LM2596 because cd74hc4067 multiplexers are designed to take an input between 0 and 3.3V.…

Main components on the Exoskeleton-Glove main

Exoskeleton-Glove main bill of materials (BOM)

11 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
BOB-09056
U1, U2
1
YAAJ_DCDC_StepDown_LM2596
U6
1
SC0918
A1
2
Conn_01x12_Pin
J1, J2
2
Conn_01x02_Pin
J3, J6
2
Conn_01x24_Socket
J4, J5
1
D_Schottky
D1

Exoskeleton-Glove main design files

The KiCad project lives in the Prajwalnayak2506/Exoskeleton-Glove-main repository on GitHub; these links point at the commit this page was built from.

Exoskeleton-Glove main: common questions

How big is the Exoskeleton-Glove main PCB?

The Exoskeleton-Glove main measures 65 × 112.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Exoskeleton-Glove main?

11 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Exoskeleton-Glove main design files?

From the Prajwalnayak2506/Exoskeleton-Glove-main repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Exoskeleton-Glove main design in my own project?

The repository has no license, so all rights stay with Prajwalnayak2506. Use it as a reference, and ask the author before reusing the design.

Similar boards