LPC 00
About the LPC 00 PCB
LPC 00 is an open source NXP PCB design by probe-rs, published on GitHub. It is a 4-layer board measuring 67 × 54 mm, with 37 components from 12 distinct parts.
Its main chip is the LPC845M301JHI33Y, from the NXP family. Other key parts include the LPC1114FDH28_102_5, LPC55S69JBD64K and LPC1313FBD48_01,15. By type, the board carries 18 capacitors, 13 resistors, 4 ICs, 1 connector and 1 inductor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A Raspberry PI shield for testing probe-rs against many chips & probes.
Main components on the LPC 00
LPC 00 bill of materials (BOM)
37 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LPC845M301JHI33Y | LPC845M301JHI33Y | U0 |
| 1 | LPC1114FDH28_102_5 | LPC1114FDH28_1025 | U1 |
| 1 | LPC55S69JBD64K | LPC55S69JBD64K | U2 |
| 1 | LPC1313FBD48_01,15 | LPC1313FBD48_0115 | U3 |
| 1 | m2_keyA_67pin_daughterboard | m2_keyB | J1 |
| 1 | 4.7u | TYA40204R7M-10 | L1 |
| 3 | 4.7u | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C4, C16 |
| 12 | 100n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C3, C5, C6, C8, C11, C12, C13 +4 |
| 2 | 22u | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7, C10 |
| 1 | 47p | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C9 |
| 8 | 100k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R7, R11, R12, R13 |
| 5 | 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R6, R8, R9, R10 |
LPC 00 design files
The KiCad project lives in the probe-rs/hive repository on GitHub; these links point at the commit this page was built from.
LPC 00: common questions
What microcontroller does the LPC 00 use?
The LPC 00 is built around the LPC845M301JHI33Y, from the NXP family.
How big is the LPC 00 PCB?
The LPC 00 measures 67 × 54 mm, has 4 copper layers and is 0.8 mm thick.
How many components are on the LPC 00?
37 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the LPC 00 design files?
From the probe-rs/hive repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LPC 00 design in my own project?
The repository has no license, so all rights stay with probe-rs. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the LPC 00 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in hive
ESP32ESP32 SIFIVE
67 × 54 mm51 parts4LNo license15
Microchip SAMATSAMD 00
67 × 54 mm44 parts4LNo license15
Nordic nRFNRF 00
67 × 54 mm34 parts4LNo license15
Target stack shield
85 × 66 mm34 parts4LNo license15
STM32Daughterboard STM32 00
67 × 54 mm31 parts4LNo license15
Testboard
85 × 40 mm27 parts2LNo license15
Probe shield
85 × 56 mm11 parts4LNo license15
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532