HardLabs

Daughterboard STM32 00

probe-rs·hive·daughterboard/STM32_00/STM32_00.kicad_pcb

Daughterboard STM32 00 PCB layout, top view — open source STM32 board by probe-rs

About the Daughterboard STM32 00 PCB

Daughterboard STM32 00 is an open source STM32 PCB design by probe-rs, published on GitHub. It is a 4-layer board measuring 67 × 54 mm, with 31 components from 9 distinct parts.

Its main chip is the STM32G031F4P6, from the STM32 family. Other key parts include the STM32F401CCUx, STM32L151C8TxA and STM32F103C8Tx. By type, the board carries 21 capacitors, 5 resistors, 4 ICs and 1 connector.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A Raspberry PI shield for testing probe-rs against many chips & probes.

Main components on the Daughterboard STM32 00

STM32G031F4P6STM32F401CCUxSTM32L151C8TxASTM32F103C8Tx

Daughterboard STM32 00 bill of materials (BOM)

31 components, 9 distinct parts.

QtyPartRefs
1
STM32G031F4P6
U0
1
STM32F401CCUx
U1
1
STM32L151C8TxA
U2
1
STM32F103C8Tx
U3
1
m2_keyA_67pin_daughterboard
J1
16
100n
C1, C4, C5, C6, C7, C9, C10, C12 +8
4
4.7u
C2, C3, C11, C19
1
10u
C13
5
100k
R1, R2, R3, R4, R5

Daughterboard STM32 00 design files

The KiCad project lives in the probe-rs/hive repository on GitHub; these links point at the commit this page was built from.

Daughterboard STM32 00: common questions

What microcontroller does the Daughterboard STM32 00 use?

The Daughterboard STM32 00 is built around the STM32G031F4P6, from the STM32 family.

How big is the Daughterboard STM32 00 PCB?

The Daughterboard STM32 00 measures 67 × 54 mm, has 4 copper layers and is 0.8 mm thick.

How many components are on the Daughterboard STM32 00?

31 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Daughterboard STM32 00 design files?

From the probe-rs/hive repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Daughterboard STM32 00 design in my own project?

The repository has no license, so all rights stay with probe-rs. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Daughterboard STM32 00 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in hive

Similar boards