ATSAMD 00
About the ATSAMD 00 PCB
ATSAMD 00 is an open source Microchip SAM PCB design by probe-rs, published on GitHub. It is a 4-layer board measuring 67 × 54 mm, with 44 components from 13 distinct parts.
Its main chip is the ATSAMD10C13A-SS, from the Microchip SAM family. Other key parts include the ATSAMD09D14A-M, ATSAMD51J18A-A and ATSAMD21E16L-AFT. By type, the board carries 20 capacitors, 19 resistors, 4 ICs and 1 connector.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A Raspberry PI shield for testing probe-rs against many chips & probes.
Main components on the ATSAMD 00
ATSAMD 00 bill of materials (BOM)
44 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMD10C13A-SS | SOIC-14_3.9x8.7mm_P1.27mm | U0 |
| 1 | ATSAMD09D14A-M | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | ATSAMD51J18A-A | TQFP-64_10x10mm_P0.5mm | U2 |
| 1 | ATSAMD21E16L-AFT | ATSAMD21E16L-AFT | U3 |
| 1 | m2_keyA_67pin_daughterboard | m2_keyB | J1 |
| 13 | 100n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C3, C4, C6, C7, C8, C12, C13 +5 |
| 3 | 4.7u | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C5, C9 |
| 2 | 10u | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C10, C17 |
| 2 | 1u | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C11, C16 |
| 4 | 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R6, R11, R15 |
| 4 | 330 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R7, R12, R16 |
| 4 | 1k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R8, R13, R17 |
| 7 | 100k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R5, R9, R10, R14, R18, R19 |
ATSAMD 00 design files
The KiCad project lives in the probe-rs/hive repository on GitHub; these links point at the commit this page was built from.
ATSAMD 00: common questions
What microcontroller does the ATSAMD 00 use?
The ATSAMD 00 is built around the ATSAMD10C13A-SS, from the Microchip SAM family.
How big is the ATSAMD 00 PCB?
The ATSAMD 00 measures 67 × 54 mm, has 4 copper layers and is 0.8 mm thick.
How many components are on the ATSAMD 00?
44 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the ATSAMD 00 design files?
From the probe-rs/hive repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ATSAMD 00 design in my own project?
The repository has no license, so all rights stay with probe-rs. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ATSAMD 00 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in hive
ESP32ESP32 SIFIVE
67 × 54 mm51 parts4LNo license15
NXPLPC 00
67 × 54 mm37 parts4LNo license15
Nordic nRFNRF 00
67 × 54 mm34 parts4LNo license15
Target stack shield
85 × 66 mm34 parts4LNo license15
STM32Daughterboard STM32 00
67 × 54 mm31 parts4LNo license15
Testboard
85 × 40 mm27 parts2LNo license15
Probe shield
85 × 56 mm11 parts4LNo license15
Similar boards
Microchip SAMMicrocontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1k
Microchip SAMTaco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1k
Microchip SAMFpgaboy
Wren6991
50 × 50 mm89 parts4LNo license508
Microchip SAMOpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487
Microchip SAMModulAdapter universal
100 × 69.5 mm45 parts2LGPL-3.0487
Microchip SAMKira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2415