8 open source boards using the IP4234CZ6,125

Real designs built with the IP4234CZ6,125, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

The IP4234CZ6,125 in open source designs

The gallery holds 8 open source boards using the IP4234CZ6,125 from 4 GitHub repositories; a typical one measures about 57 × 55.5 mm and carries around 64 components.

63% use four copper layers or more, and 13% carry an open source license.

The most starred is Mooltipass by limpkin.

Microcontrollers on boards using the IP4234CZ6,125

What boards using the IP4234CZ6,125 are built for

IP4234CZ6,125: common questions

Where can I find a IP4234CZ6,125 reference design?

Each of the 8 boards on this page is a real design using the IP4234CZ6,125. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the IP4234CZ6,125?

The AT45DB011D, ATMEGA32U4_QFN, CON_UGM128032A6B01 and ST662ACD appear in the most repositories here.

Which microcontrollers do boards using the IP4234CZ6,125 use?

Most are built on AVR/Arduino (4), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the IP4234CZ6,125?

The median is 57 × 55.5 mm, and 38% are two-layer designs.

What is the most popular open source board using the IP4234CZ6,125?

By GitHub stars, Mooltipass by limpkin, with 528 stars.

Can I simulate one of these boards using the IP4234CZ6,125 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part