NanoGris

Quinienl·NanoGris

NanoGris PCB layout, top view — open source AVR/Arduino board by Quinienl

About the NanoGris PCB

NanoGris is an open source AVR/Arduino PCB design by Quinienl, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 68.5 × 108 mm, with 108 components from 44 distinct parts.

Its main chip is the ARDUINO_NANO_V2.X, from the AVR/Arduino family. Other key parts include the MCP6002_1, L7805, LM4040LP-5 and 74HC595. By type, the board carries 45 resistors, 16 capacitors, 8 connectors, 6 ICs, 6 diodes and 2 transistors.

It belongs with the test & measurement designs in this gallery.

From the project

Arduino Nano version of Mutable Instruments Grids

Made this version with Thru Hole parts and a Arduino Nano. Schematics are heavely based on Mutable Instruments schematics. This is not a Mutable Instuments product.

Note: panel hole for button might be a bit to big or small (depends if you use buttoncaps)

I made this for my own and would like to share it with you. I'm doing this as a hobby so expect support to be like that to ;) Everything at your own risk..

Main components on the NanoGris

NanoGris bill of materials (BOM)

108 components, 44 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
MCP6002_1
U1, U2, U3
1
L7805
U4
1
LM4040LP-5
U5
1
74HC595
U6
1
ARDUINO_NANO_V2.X
Arduino_Nano_v2.x
A1
2
2N3904
Q1, Q2
1
CV_X
X1
1
CV_Y
Y1
2
CONN_01X10
Conn_01x10
J7, J13
1
CONN_01X12
Conn_01x12
J10
1
CONN_01X12
Conn_01x12
J11
1
CONN_02X05_ODD_EVEN
Conn_02x05_Odd_Even
J12
2
CONN_01X10
Conn_01x10
J14, J15
1
CONN_01X03
Conn_01x03
J16
1
CH1
CH1
1
CH1_ACC
CH1_AC1
1
CV_CH1
CH1_FILL1
1
CH2
CH2
1
CH2_ACC
CH2_AC1
1
CV_CH2
CH2_FILL1
Show 24 more
QtyPartRefs
1
CH3
CH3
1
CH3_ACC
CH3_AC1
1
CV_CH3
CH3_FILL1
1
ClockOutput
CLK1
1
CV_CLOCK
CLOCK1
7
10k
P_CH1, P_CH2, P_CH3, P_RND1, P_TEMPO1, P_X1, P_Y1
1
CV_RESET
RESET1
1
SW_Push
RESET2
1
RandomGate
RND1
1
CV_RND
RND2
1
CH1
D1
1
CH2
D2
1
CH3
D3
1
CLK
D4
2
1N4148
1n4148
D5, D6
7
10NF
10nf
C1, C2, C5, C6, C8, C9, C12
5
100NF
100nf
C3, C4, C7, C10, C16
2
0.47UF
0.47uf
C11, C15
2
10UF
10uf
C13, C14
30
100K
100k
R1, R2, R3, R4, R5, R6, R7, R8 +22
4
100R
100r
R25, R26, R27, R28
2
10R
10r
R29, R30
1
100K
10k
R31
8
1k
R32, R33, R34, R35, R36, R37, R38, R39

NanoGris design files

The KiCad project lives in the Quinienl/NanoGris repository on GitHub; these links point at the commit this page was built from.

NanoGris: common questions

What microcontroller does the NanoGris use?

The NanoGris is built around the ARDUINO_NANO_V2.X, from the AVR/Arduino family.

How big is the NanoGris PCB?

The NanoGris measures 68.5 × 108 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the NanoGris?

108 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the NanoGris design files?

From the Quinienl/NanoGris repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the NanoGris design in my own project?

Yes, under the terms of its GPL-3.0 license, which Quinienl chose for the repository.

Can I test firmware for the NanoGris without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards