16 open source boards using the LM4040LP-5
Real designs built with the LM4040LP-5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
NanoGris
Quinienl
68.5 × 108 mm108 parts2LGPL-3.041AVR/Arduino
Offshoots
MiguelDeTrool
30 × 128.3 mm49 parts2LGPL-3.026AVR/Arduino
Tarbleming
MiguelDeTrool
71 × 128.5 mm91 parts2LCustom license14AVR/Arduino
KOSMO LATTICE
sebastianbeyer
100 × 200 mm105 parts2LNo license4RP2040/RP2350
Wavetable hardware pcb 2 rev1
szegedylorant
40.6 × 128.5 mm95 parts2LNo license1Ripples
blthree
70.1 × 99.1 mm103 parts2LNo license0AVR/Arduino
AVML: PCB1 & PCB2
joem
37.5 × 100 mm74 parts2LNo license0AVR/Arduino
Quantizer
QuinnFreedman
50 × 100 mm105 parts2LNo license114RP2040/RP2350
Board B
szegedylorant
38.1 × 100 mm68 parts2LNo license1Working checkpoint 12hp
blthree
81.3 × 99.1 mm103 parts2LNo license0DMH Dual VCA Mk3 PCB Main
DeMarco
49 × 175 mm97 parts2LCC0-1.00Working checkpoint1
blthree
81.3 × 99.1 mm103 parts2LNo license0DMH Dual VCA Mk3 PCB 1
DeMarco
48 × 175 mm78 parts2LCC0-1.00RP2040/RP2350
Sycamore
tpcarlson
60.1 × 128.5 mm145 parts2LNo license106Cem3340-module REDDIT
blthree
49.5 × 99.7 mm65 parts2LNo license0RP2040/RP2350
Rowan
tpcarlson
60 × 39.6 mm93 parts2LNo license106
How designs wire the LM4040LP-5
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the LM4040LP-5 connects to, and the resistors, capacitors and other passives placed on it.
- The A pin has a capacitor to GND on 6 of 10 designs, most often 470 nF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Apin 3 | Connected to: -5V 40% · a signal 40% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Quantizer by QuinnFreedman, Rowan by tpcarlson, NanoGris by Quinienl and Offshoots by MiguelDeTrool.
The LM4040LP-5 in open source designs
The gallery holds 16 open source boards using the LM4040LP-5 from 10 GitHub repositories; a typical one measures about 55 × 104 mm and carries around 96 components.
100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Quantizer by QuinnFreedman.
Parts used alongside the LM4040LP-5
Microcontrollers on boards using the LM4040LP-5
What boards using the LM4040LP-5 are built for
LM4040LP-5: common questions
Where can I find a LM4040LP-5 reference design?
Each of the 16 boards on this page is a real design using the LM4040LP-5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM4040LP-5 A pin connected?
The A pin has a capacitor to GND on 6 of 10 designs, most often 470 nF (then 100 nF). Counted from the KiCad layouts of 10 open source designs using the LM4040LP-5.
What parts are used alongside the LM4040LP-5?
The Arduino_Nano_v3.x, L7805, TL072, MCP6002-xP and 74HC595 appear in the most repositories here.
Which microcontrollers do boards using the LM4040LP-5 use?
Most are built on AVR/Arduino (6) and RP2040/RP2350 (4).
How big is a typical board using the LM4040LP-5?
The median is 55 × 104 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM4040LP-5?
By GitHub stars, Quantizer by QuinnFreedman, with 114 stars.
Can I simulate one of these boards using the LM4040LP-5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.