2 open source boards using the MCP6002_1

Real designs built with the MCP6002_1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The MCP6002_1 in open source designs

The gallery holds 2 open source boards using the MCP6002_1 from 2 GitHub repositories; a typical one measures about 84.3 × 154 mm and carries around 107 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is NanoGris by Quinienl.

Parts used alongside the MCP6002_1

Microcontrollers on boards using the MCP6002_1

What boards using the MCP6002_1 are built for

MCP6002_1: common questions

Where can I find a MCP6002_1 reference design?

Each of the 2 boards on this page is a real design using the MCP6002_1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the MCP6002_1?

The 74HC595, Arduino_Nano_v2.x, L7805 and LM4040LP-5 appear in the most repositories here.

Which microcontrollers do boards using the MCP6002_1 use?

Most are built on AVR/Arduino (2).

How big is a typical board using the MCP6002_1?

The median is 84.3 × 154 mm, and 100% are two-layer designs.

What is the most popular open source board using the MCP6002_1?

By GitHub stars, NanoGris by Quinienl, with 41 stars.

Can I simulate one of these boards using the MCP6002_1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part