CEI-TOOL

radiostart·CEI-TOOL

CEI-TOOL PCB layout, top view — open source ESP32 board by radiostart

About the CEI-TOOL PCB

CEI-TOOL is an open source ESP32 PCB design by radiostart, published on GitHub. It is a 2-layer board measuring 71.5 × 33 mm, with 51 components from 28 distinct parts.

Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the XC6220B331PR-G, BQ24075RGTT and USBLC6-2SC6. By type, the board carries 22 resistors, 14 capacitors, 5 connectors, 4 ICs, 3 diodes and 2 switches.

Main components on the CEI-TOOL

CEI-TOOL bill of materials (BOM)

51 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-MINI-1
U1
1
XC6220B331PR-G
U2
1
BQ24075RGTT
U3
1
USBLC6-2SC6
U4
1
TYPE-C-31-M-12
J1
1
532610871
J2
1
SM04B-SRSS-TB
J4
1
532610271
J5
1
SM02B-SRSS-TB_LF__SN_
J6
1
0603L100SLYR
F1
2
KMR211NGLFS
S1, S3
1
PESD5V0S2BT
D2
1
LTST-S270KRKT
D3
1
SMF5.0A
D4
7
10µF
C1, C2, C3, C4, C5, C6, C10
2
0.1µF
C7, C12
2
1µF
C8, C13
1
0.01µF
C9
1
0.47µF
C11
1
22µF
C14
Show 8 more
QtyPartRefs
5
47kΩ
R1, R2, R16, R17, R20
5
10kΩ
R3, R9, R11, R13, R22
2
5.1kΩ
R4, R6
1
1.8kΩ
R5
1
3.3kΩ
R7
3
2.2kΩ
R8, R10, R21
4
22Ω
R12, R14, R18, R19
1
1kΩ
R15

CEI-TOOL design files

The KiCad project lives in the radiostart/CEI-TOOL repository on GitHub; these links point at the commit this page was built from.

CEI-TOOL: common questions

What microcontroller does the CEI-TOOL use?

The CEI-TOOL is built around the ESP32-C3-MINI-1, from the ESP32 family.

How big is the CEI-TOOL PCB?

The CEI-TOOL measures 71.5 × 33 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CEI-TOOL?

51 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CEI-TOOL design files?

From the radiostart/CEI-TOOL repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the CEI-TOOL design in my own project?

The repository has no license, so all rights stay with radiostart. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CEI-TOOL without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards