Unoq power shield
ramalamadingdong·pcb-agent·examples/unoq-power-shield/unoq-power-shield.kicad_pcb
About the Unoq power shield
Unoq power shield is an open source PCB design by ramalamadingdong, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 53.3 × 68.6 mm, with 49 components from 43 distinct parts.
Other key parts include the TPS54331DDAR and INA226AIDGSR. By type, the board carries 19 resistors, 10 capacitors, 9 connectors, 5 transistors, 3 diodes and 2 ICs.
It belongs with the dev boards & breakouts, displays & leds and power & battery designs in this gallery.
From the project
Design a PCB end to end with an agent: CSV source of truth, idempotent build passes, containerized KiCad+Freerouting, and checks that run on the fab output.
Status: UNBUILT. No physical board of this design has been fabricated or powered on yet. Until one has, treat this as a reference for exercising the pipeline, not a verified design.
The design has passed its pre-order gates (2026-08-30): routed with 0 unconnected and 0 clearance violations across 5 identical DRC runs, validategerbers` 14/0, ERC clean, every BOM line in stock. The 17 residual DRC items are all form-factor or courtyard-graze artifacts, individually explained in the ledger in rev-1-plan.md. Passing gates is not the same as working hardware — the UNBUILT warning above stands…

Main components on the Unoq power shield
Unoq power shield bill of materials (BOM)
49 components, 43 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS54331DDAR | TI_SO-PowerPAD-8 | U1 |
| 1 | INA226AIDGSR | MSOP-10_3x3mm_P0.5mm | U2 |
| 4 | BSS138LT1G | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | AO4407A | SOIC-8_3.9x4.9mm_P1.27mm | Q5 |
| 1 | KF301-5.0-2P VIN 7-24V | KF301_5.0_2P | J1 |
| 1 | KF301-5.0-2P 5V OUT | KF301_5.0_2P | J2 |
| 2 | SM04B-SRSS-TB Qwiic | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3, J4 |
| 1 | 5V IO | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | UNO PWR | PinHeader_1x08_P2.54mm_Vertical | J10 |
| 1 | UNO ANALOG | PinHeader_1x06_P2.54mm_Vertical | J11 |
| 1 | UNO D0-D7 | PinHeader_1x08_P2.54mm_Vertical | J12 |
| 1 | UNO D8-SCL | PinHeader_1x10_P2.54mm_Vertical | J13 |
| 1 | SS34 | D_SMA | D1 |
| 1 | BZT52C12 | D_SOD-123 | D2 |
| 1 | XL-1615RGBC-RF | XL1615RGBC | D3 |
| 1 | SWPA6045S100MT 10uH | SWPA6045S | L1 |
| 2 | C51205 4.7uF 50V | C_1206_3216Metric | C1, C2 |
| 1 | C14663 C3 | C_0603_1608Metric | C3 |
| 1 | C14663 C4 | C_0603_1608Metric | C4 |
| 1 | C57112 C5 | C_0603_1608Metric | C5 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C1588 C6 | C_0603_1608Metric | C6 |
| 1 | C14858 C7 | C_0603_1608Metric | C7 |
| 2 | C12891 22uF 25V | C_1206_3216Metric | C8, C9 |
| 1 | C14663 C10 | C_0603_1608Metric | C10 |
| 1 | C5375464 10mR 3W | R_2512_6332Metric | R1 |
| 1 | C25804 R2 | R_0603_1608Metric | R2 |
| 1 | C25808 R3 | R_0603_1608Metric | R3 |
| 1 | C4216 R4 | R_0603_1608Metric | R4 |
| 1 | C22967 R5 | R_0603_1608Metric | R5 |
| 1 | C23186 R6 | R_0603_1608Metric | R6 |
| 1 | C23352 R7 | R_0603_1608Metric | R7 |
| 1 | C25804 R8 | R_0603_1608Metric | R8 |
| 1 | C25804 R9 | R_0603_1608Metric | R9 |
| 1 | C25804 R10 | R_0603_1608Metric | R10 |
| 1 | C25804 R11 | R_0603_1608Metric | R11 |
| 1 | C25804 R12 | R_0603_1608Metric | R12 |
| 1 | C25804 R13 | R_0603_1608Metric | R13 |
| 1 | C25804 R14 | R_0603_1608Metric | R14 |
| 1 | C25804 R15 | R_0603_1608Metric | R15 |
| 1 | C25804 R16 | R_0603_1608Metric | R16 |
| 1 | C23138 R17 | R_0603_1608Metric | R17 |
| 1 | C23138 R18 | R_0603_1608Metric | R18 |
| 1 | C23138 R19 | R_0603_1608Metric | R19 |
Unoq power shield design files
The KiCad project lives in the ramalamadingdong/pcb-agent repository on GitHub; these links point at the commit this page was built from.
Unoq power shield: common questions
How big is the Unoq power shield?
The Unoq power shield measures 53.3 × 68.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Unoq power shield?
49 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Unoq power shield design files?
From the ramalamadingdong/pcb-agent repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Unoq power shield design in my own project?
Yes, under the terms of its GPL-3.0 license, which ramalamadingdong chose for the repository.
More boards in pcb-agent
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k