8 open source boards using the TPS54331DDAR
Real designs built with the TPS54331DDAR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Pre route
ramalamadingdong
53.3 × 68.6 mm49 parts4LGPL-3.04STM32
Color sensor
nevzathipertek
74 × 32 mm91 parts2LNo license1STM32
Kinisi motor controller board
szolotykh
75 × 60 mm72 parts4LMIT1Rtl8367-switch
Deco025
100 × 72 mm219 parts4LCERN-OHL-S-2.00STM32
Hagent
changgeruoxiao
85 × 65 mm71 parts4LMIT0TPS54331DDA
znibb
18.8 × 19.3 mm17 parts4LNo license0Unoq power shield
ramalamadingdong
53.3 × 68.6 mm49 parts4LGPL-3.04TPS54331DDAR Buck converter
Amaza-Ronald
72 × 27 mm15 parts2LNo license0
How designs wire the TPS54331DDAR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TPS54331DDAR connects to, and the resistors, capacitors and other passives placed on it.
- The BOOT pin has a series capacitor on 7 of 7 designs, most often 100 nF.
- The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 4.7 µF (then 10 µF).
- The COMP pin has a capacitor to GND on 7 of 7 designs, most often 47 pF (then 10 nF).
- The PH pin has a series capacitor on 7 of 7 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| BOOTpin 1 | Connected to: Signal 100% |
|
| VINpin 2 | Connected to: VIN 71% · a signal 29% |
|
| ENpin 3 | Connected to: Signal 57% · not connected 43% |
|
| SSpin 4 | Connected to: Signal 86% |
|
| VSENSEpin 5 | Connected to: Signal 100% |
|
| COMPpin 6 | Connected to: Signal 100% |
|
| GNDpin 7 | Connected to: GND 100% | — |
| PHpin 8 | Connected to: Signal 100% |
|
| POWERPADpin 9 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pre route by ramalamadingdong, Color sensor by nevzathipertek, Kinisi motor controller board by szolotykh and TPS54331DDAR Buck converter by Amaza-Ronald.
The TPS54331DDAR in open source designs
The gallery holds 8 open source boards using the TPS54331DDAR from 7 GitHub repositories; a typical one measures about 73 × 62.5 mm and carries around 60 components.
75% use four copper layers or more, and 63% carry an open source license.
The most starred is Pre route by ramalamadingdong.
Parts used alongside the TPS54331DDAR
Microcontrollers on boards using the TPS54331DDAR
What boards using the TPS54331DDAR are built for
TPS54331DDAR: common questions
Where can I find a TPS54331DDAR reference design?
Each of the 8 boards on this page is a real design using the TPS54331DDAR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS54331DDAR BOOT pin connected?
The BOOT pin has a series capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the TPS54331DDAR.
What decoupling capacitors do designs use on the TPS54331DDAR VIN pin?
The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the TPS54331DDAR.
How is the TPS54331DDAR COMP pin connected?
The COMP pin has a capacitor to GND on 7 of 7 designs, most often 47 pF (then 10 nF). Counted from the KiCad layouts of 7 open source designs using the TPS54331DDAR.
Which microcontrollers do boards using the TPS54331DDAR use?
Most are built on STM32 (3).
How big is a typical board using the TPS54331DDAR?
The median is 73 × 62.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the TPS54331DDAR?
By GitHub stars, Pre route by ramalamadingdong, with 4 stars.
Can I simulate one of these boards using the TPS54331DDAR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.