MareapPowerBoard

RandBeyy·MareapPowerBoard·Hardware/MareapPowerBoard/MareapPowerBoard.kicad_pcb

MareapPowerBoard PCB layout, top view — open source STM32 board by RandBeyy

About the MareapPowerBoard PCB

MareapPowerBoard is an open source STM32 PCB design by RandBeyy, published on GitHub. It is a 2-layer board measuring 90 × 70 mm, with 69 components from 51 distinct parts.

Its main chip is the STM32F103C8TX, from the STM32 family. Other key parts include the LM2576HVS-ADJ, LD1117V33, LM2903 and AD8418. By type, the board carries 16 capacitors, 15 connectors, 14 resistors, 5 ICs, 4 jumpers and 4 switches.

It belongs with the displays & leds designs in this gallery.

From the project

Mareap Power Board is a custom USB power and diagnostic board for testing self-built electronic devices. It provides a controllable power path, measures the current drawn by a connected device, and displays live readings and status on an onboard OLED. The repository contains both

Mareap Power Board is a custom USB power and diagnostic board for testing self-built electronic devices. It provides a controllable power path, measures the current drawn by a connected device, and displays live readings and status on an onboard OLED. The repository contains both the KiCad hardware design and the STM32 firmware.

- Measures load current using a shunt and current-sense amplifier, samples the signal with the STM32 ADC, and calculates an averaged reading. - Shows current in amperes and power state on a 0.96-inch SSD1306 OLED. - Lets the user switch the output on and off with a…

Main components on the MareapPowerBoard

MareapPowerBoard bill of materials (BOM)

69 components, 51 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM2576HVS-ADJ
U1
1
LD1117V33
U2
1
LM2903
U3
1
STM32F103C8TX
STM32F103C8Tx
U4
1
AD8418
U5
1
IRLML0030
Q1
1
Crystal
Y1
1
16MHZ
16MHz
Y2
1
XT60PW-M
J1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J2
1
USB_C_MALE
J3
1
SSD1306
J4
1
Debug_Pins
J5
1
CONN_01X06_PIN
Conn_01x06_Pin
J6
1
SDA_TESTPIN
J7
1
SCL_TESTPIN
J8
1
USB_C_FEMALE
J9
1
Comp_Plus_Pin
J10
1
Comp_Minus_Pin
J11
1
5VCONV_PIN
5VConv_Pin
J12
Show 31 more
QtyPartRefs
1
Batt_Pin
J13
1
5VUSB_PIN
5VUSB_Pin
J14
1
PowerPins
J15
2
JUMPER_2_OPEN
Jumper_2_Open
JP1, JP2
1
3.3VJUMP
3.3VJump
JP3
1
5VJUMP
5VJump
JP4
2
2k2
RP_SCL1, RP_SDA1
1
1K
R_VR1
1
0.1K
R_VR2.1
1
3K
R_VR2.2
2
SW_DPDT_X2
SW_DPDT_x2
SW1, SW3
1
SW_Reset
SW2
1
Button
SW4
1
1N5822
D1
1
120R
FB1
1
100UH
100uH
L1
1
1000UF
1000uF
C1
1
4.7UF
4.7uF
C2
7
100NF
100nF
C3, C4, C5, C6, C10, C12, C15
2
1UF
1uF
C7, C9
1
10NF
10nF
C8
1
10UF
10uF
C11
2
10PF
10pF
C13, C14
1
100UF
100uF
C16
5
10K
R1, R4, R6, R10, R12
2
5K1
R2, R3
1
0.1R
R5
1
3K
R7
1
100R
R8
3
1K
R9, R11, R13
1
10K
R14

MareapPowerBoard design files

The KiCad project lives in the RandBeyy/MareapPowerBoard repository on GitHub; these links point at the commit this page was built from.

MareapPowerBoard: common questions

What microcontroller does the MareapPowerBoard use?

The MareapPowerBoard is built around the STM32F103C8TX, from the STM32 family.

How big is the MareapPowerBoard PCB?

The MareapPowerBoard measures 90 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MareapPowerBoard?

69 components, from 51 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MareapPowerBoard design files?

From the RandBeyy/MareapPowerBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MareapPowerBoard design in my own project?

The repository has no license, so all rights stay with RandBeyy. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MareapPowerBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards