Long-Range-Communication device-LoRa CO-

Rayudumalluru·Long-Range-Communication-device-LoRa_CO-·LoRaCo_project_files/LoRaCo_project.kicad_pcb

Long-Range-Communication device-LoRa CO- PCB layout, top view — open source ESP32 board by Rayudumalluru

About the Long-Range-Communication device-LoRa CO- PCB

Long-Range-Communication device-LoRa CO- is an open source ESP32 PCB design by Rayudumalluru, published on GitHub under the Custom license license. It is a 2-layer board measuring 79.6 × 124.3 mm, with 35 components from 6 distinct parts.

Its main chip is the ESP32_v1, from the ESP32 family. Other key parts include the MCP23017_SO. By type, the board carries 30 diodes, 3 ICs, 1 LED and 1 capacitor.

It belongs with the rf & radio, iot & wireless and displays & leds designs in this gallery.

From the project

LoRaCo is a handheld wireless communicator using ESP32 and SX1278 LoRa for long-range messaging. It features an OLED interface, custom 5×6 keypad, MCP23017 GPIO expansion, and rechargeable power.

An in-progress handheld communication-device design combining an ESP32-based controller, an SX1278 LoRa module, an OLED interface, and a physical keyboard on a custom KiCad PCB.

PCB layout · Schematic PDF · DRC snapshot

KiCad PCB-editor view of the board layout. The screenshot is a design view, not a fabricated-board photograph.

LoRaCo is a custom-board concept for handheld text communication over LoRa. Its intended user experience is to compose and navigate messages using a physical keypad, view information on an OLED, and exchange data through an SX1278 radio controlled by an ESP32.

Long-Range-Communication device-LoRa CO-, from the project README
From the project README

Main components on the Long-Range-Communication device-LoRa CO-

Long-Range-Communication device-LoRa CO- bill of materials (BOM)

35 components, 6 distinct parts.

QtyPartRefs
1
~
U1
1
~
U2
1
MCP23017_SO
U3
1
~
.e1
30
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +22
1
100n
C1

Long-Range-Communication device-LoRa CO- design files

The KiCad project lives in the Rayudumalluru/Long-Range-Communication-device-LoRa_CO- repository on GitHub; these links point at the commit this page was built from.

Long-Range-Communication device-LoRa CO-: common questions

What microcontroller does the Long-Range-Communication device-LoRa CO- use?

The Long-Range-Communication device-LoRa CO- is built around the ESP32_v1, from the ESP32 family.

How big is the Long-Range-Communication device-LoRa CO- PCB?

The Long-Range-Communication device-LoRa CO- measures 79.6 × 124.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Long-Range-Communication device-LoRa CO-?

35 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Long-Range-Communication device-LoRa CO- design files?

From the Rayudumalluru/Long-Range-Communication-device-LoRa_CO- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Long-Range-Communication device-LoRa CO- design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Long-Range-Communication device-LoRa CO- without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards