Jamer

RDAsaBranca·obsat-pegasus·hardware/jamer/jamer.kicad_pcb

Jamer PCB layout, top view — open source ESP32 board by RDAsaBranca

About the Jamer PCB

Jamer is an open source ESP32 PCB design by RDAsaBranca, published on GitHub. It is a 2-layer board measuring 65 × 70 mm, with 8 components from 7 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. By type, the board carries 3 connectors, 1 IC, 1 fuse, 1 switch, 1 diode and 1 resistor.

From the project

Repositório destinado para a confecção do CubeSat para a 1ª fase da 3º edição da OBSAT. Aqui encontra-se o relatório enviado para a competição, os materiais de estudos utilizados. A organização do Repositório consiste na seguinte lógica: - docs -> Local destinado a concentrar os

Repositório destinado para a confecção do CubeSat para a 1ª fase da 3º edição da OBSAT. Aqui encontra-se o relatório enviado para a competição, os materiais de estudos utilizados. A organização do Repositório consiste na seguinte lógica: - docs -> Local destinado a concentrar os datasheets, o relatório enviado e documentos relacionados a P&D.

- firmware -> Local onde estará os códigos de cada parte do CubeSat;

Main components on the Jamer

Jamer bill of materials (BOM)

8 components, 7 distinct parts.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
2
Conn_01x08_Socket
J1, J2
1
Screw_Terminal_01x02
J3
1
4628
F1
1
PBH2UOANAGX
S1
1
LED
D2
1
220
R5

Jamer design files

The KiCad project lives in the RDAsaBranca/obsat-pegasus repository on GitHub; these links point at the commit this page was built from.

Jamer: common questions

What microcontroller does the Jamer use?

The Jamer is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the Jamer PCB?

The Jamer measures 65 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Jamer?

8 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Jamer design files?

From the RDAsaBranca/obsat-pegasus repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Jamer design in my own project?

The repository has no license, so all rights stay with RDAsaBranca. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Jamer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in obsat-pegasus

Similar boards