Obdh Bacural
RDAsaBranca·obsat-pegasus·hardware/OBDH/obdh_Bacural.kicad_pcb
About the Obdh Bacural PCB
Obdh Bacural is an open source ESP32 PCB design by RDAsaBranca, published on GitHub. It is a 2-layer board measuring 90 × 90 mm, with 14 components from 9 distinct parts.
Its main chip is the ESP32-C3_SUPERMINI_TH, from the ESP32 family. By type, the board carries 4 connectors, 4 resistors, 2 ICs, 2 capacitors, 1 buzzer and 1 diode.
From the project
Repositório destinado para a confecção do CubeSat para a 1ª fase da 3º edição da OBSAT. Aqui encontra-se o relatório enviado para a competição, os materiais de estudos utilizados. A organização do Repositório consiste na seguinte lógica: - docs -> Local destinado a concentrar os
Repositório destinado para a confecção do CubeSat para a 1ª fase da 3º edição da OBSAT. Aqui encontra-se o relatório enviado para a competição, os materiais de estudos utilizados. A organização do Repositório consiste na seguinte lógica: - docs -> Local destinado a concentrar os datasheets, o relatório enviado e documentos relacionados a P&D.
- firmware -> Local onde estará os códigos de cada parte do CubeSat;
Main components on the Obdh Bacural
Obdh Bacural bill of materials (BOM)
14 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3_SUPERMINI_TH | MODULE_ESP32-C3_SUPERMINI_TH | U1 |
| 1 | ~ | PinHeader_1x06_P2.54mm_Vertical | U3 |
| 1 | Screw_Terminal_01x08 | TerminalBlock_Xinya_XY308-2.54-8P_1x08_P2.54mm_Horizontal | J1 |
| 2 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J2, J5 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Buzzer | MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | LED | LED_D3.0mm_Horizontal_O3.81mm_Z10.0mm | D1 |
| 2 | 7,6 uF | C_0603_1608Metric | C1, C2 |
| 4 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R6, R7 |
Obdh Bacural design files
The KiCad project lives in the RDAsaBranca/obsat-pegasus repository on GitHub; these links point at the commit this page was built from.
Obdh Bacural: common questions
What microcontroller does the Obdh Bacural use?
The Obdh Bacural is built around the ESP32-C3_SUPERMINI_TH, from the ESP32 family.
How big is the Obdh Bacural PCB?
The Obdh Bacural measures 90 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Obdh Bacural?
14 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Obdh Bacural design files?
From the RDAsaBranca/obsat-pegasus repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Obdh Bacural design in my own project?
The repository has no license, so all rights stay with RDAsaBranca. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Obdh Bacural without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in obsat-pegasus
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k