MOSH-INSA

RedouaneAmour·MOSH-INSA·PCB_GAZ_SENSOR/PCB/PCB.kicad_pcb

MOSH-INSA PCB layout, top view — open source board by RedouaneAmour

About the MOSH-INSA PCB

MOSH-INSA is an open source PCB design by RedouaneAmour, published on GitHub. It is a 2-layer board measuring 96 × 67 mm, with 19 components from 16 distinct parts.

Other key parts include the LTC1050 and RN2483_Breakout. By type, the board carries 6 resistors, 5 connectors, 4 capacitors, 2 ICs and 2 switches.

It belongs with the sensors designs in this gallery.

From the project

Introduction : Ce projet s'inscrit dans le cadre de notre formation d'ingénieur à l'INSA Toulouse en 5ème année sur les objets connectés. Plus précisément, l'objectif était de pouvoir comprendre toute l'architecture IoT associée à un système connecté, de sa fabrication à son impl

Introduction : Ce projet s'inscrit dans le cadre de notre formation d'ingénieur à l'INSA Toulouse en 5ème année sur les objets connectés. Plus précisément, l'objectif était de pouvoir comprendre toute l'architecture IoT associée à un système connecté, de sa fabrication à son implémentation sur un réseau sans fil basse consommation. A ce titre nous avons conçu un capteur de gaz connecté capable de détecter plusieurs substances telles que de l'ammoniac, de l'éthanol ou même de l'air synthétique. Pour ce faire, nous avons d'abord fabriqué le capteur à base de nanoparticules en salle blanche dans…

MOSH-INSA, from the project README
From the project README

Main components on the MOSH-INSA

MOSH-INSA bill of materials (BOM)

19 components, 16 distinct parts.

QtyPartRefs
1
LTC1050
U0
1
RN2483_Breakout
U1
1
Screw_Terminal_01x02
J0
1
Power
P1
1
Analog
P2
1
Digital
P3
1
Digital
P4
1
Sensor_Aime
S0
1
SW_DPDT_x2
SW0
3
100n
C1, C2, C3
1
1u
C4
2
100k
R1, R3
1
R_CAL
R2
1
10k
R4
1
1k
R5
1
R_adjust
R6

MOSH-INSA design files

The KiCad project lives in the RedouaneAmour/MOSH-INSA repository on GitHub; these links point at the commit this page was built from.

MOSH-INSA: common questions

How big is the MOSH-INSA PCB?

The MOSH-INSA measures 96 × 67 mm, has 2 copper layers and is 1.58 mm thick.

How many components are on the MOSH-INSA?

19 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the MOSH-INSA design files?

From the RedouaneAmour/MOSH-INSA repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MOSH-INSA design in my own project?

The repository has no license, so all rights stay with RedouaneAmour. Use it as a reference, and ask the author before reusing the design.

Similar boards