Micromouse
Reiko0908·NeuralNetwork_Based_AutonomousCar·pcbs/micromouse/micromouse.kicad_pcb
About the Micromouse PCB
Micromouse is an open source ESP32 PCB design by Reiko0908, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 77.4 × 100.8 mm, with 49 components from 23 distinct parts.
Its main chip is the esp32s3_super_mini, from the ESP32 family. Other key parts include the L7806 and AMS1117-5.0. By type, the board carries 17 capacitors, 13 resistors, 10 ICs, 4 diodes, 2 modules and 2 switches.
It belongs with the sensors, iot & wireless and power & battery designs in this gallery.
From the project
This project focuses on developing an autonomous car system powered by neural networks (NN). It utilizes deep learning techniques to enable key functionalities such as perception, path planning, and control. The system processes real-world sensor data to detect the environment, predict obstacles, and make driving decisions.

Main components on the Micromouse
Micromouse bill of materials (BOM)
49 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | esp32s3_super_mini | U1 |
| 1 | L7806 | TO-220-3_Vertical | U2 |
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U3 |
| 1 | ~ | SOP-20_7.5x12.8mm_P1.27mm | U4 |
| 5 | ~ | VL53L0X_vertical | U5, U6, U7, U8, U9 |
| 1 | ~ | GY87 | U10 |
| 2 | GA12_N20 | 2P_male | M1, M2 |
| 1 | Lipo 2S | 2P_male | BT1 |
| 1 | SW_DPDT_X2 SW_DPDT_x2 | SW_SS12D07VG4 | SW1 |
| 1 | SW_Push | SW_SPST_CK_RS282G05A3 | SW2 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 2 | 1N5819 | D_SOD-323F | D2, D4 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D3 |
| 2 | 100UF 100uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 0.1UF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 10UF 10uF | CP_Radial_D5.0mm_P2.00mm | C5, C6 |
| 5 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C10, C11, C16, C17 |
| 2 | 0.1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C9 |
| 2 | 470NF 470nF | CP_Radial_D5.0mm_P2.00mm | C12, C13 |
| 2 | 0.1UF 0.1uF | CP_Radial_D5.0mm_P2.00mm | C14, C15 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 11 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R5, R6, R7, R8, R9, R10 +3 |
| 1 | 6K2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
Micromouse design files
The KiCad project lives in the Reiko0908/NeuralNetwork_Based_AutonomousCar repository on GitHub; these links point at the commit this page was built from.
Micromouse: common questions
What microcontroller does the Micromouse use?
The Micromouse is built around the esp32s3_super_mini, from the ESP32 family.
How big is the Micromouse PCB?
The Micromouse measures 77.4 × 100.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Micromouse?
49 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Micromouse design files?
From the Reiko0908/NeuralNetwork_Based_AutonomousCar repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Micromouse design in my own project?
Yes, under the terms of its Apache-2.0 license, which Reiko0908 chose for the repository.
Can I test firmware for the Micromouse without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in NeuralNetwork_Based_AutonomousCar
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k