Esp gamepad v2
Reiko0908·NeuralNetwork_Based_AutonomousCar·pcbs/esp_gamepad_v2/esp_gamepad_v2.kicad_pcb
About the Esp gamepad v2 PCB
Esp gamepad v2 is an open source ESP32 PCB design by Reiko0908, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 188.5 × 88.9 mm, with 66 components from 31 distinct parts.
Its main chip is the L7806, from the ESP32 family. Other key parts include the AMS1117-5.0, LC709203FQH-02TWG, COM-09032 and IP5306. By type, the board carries 19 resistors, 14 switches, 13 capacitors, 7 ICs, 5 connectors and 5 diodes.
It belongs with the sensors, iot & wireless and power & battery designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
This project focuses on developing an autonomous car system powered by neural networks (NN). It utilizes deep learning techniques to enable key functionalities such as perception, path planning, and control. The system processes real-world sensor data to detect the environment, predict obstacles, and make driving decisions.

Main components on the Esp gamepad v2
Esp gamepad v2 bill of materials (BOM)
66 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | LCD_TFT_1.3_inches_ST7789 | U1 |
| 1 | L7806 ~ | ESP32_S3_DevkitC1 | U2 |
| 1 | AMS1117-5.0 COM-09032 | PS4_joystick | U3 |
| 1 | ~ | MPU6050 | U4 |
| 1 | LC709203FQH-02TWG | WDFN-8-1EP_4x3mm_P0.65mm_EP2.4x1.8mm_ThermalVias | U5 |
| 1 | COM-09032 | PS4_joystick | U6 |
| 1 | IP5306 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U7 |
| 1 | SI2300 | SOT-23_Handsoldering | Q1 |
| 3 | ~ | XH_2p54_4P_male | J1, J2, J4 |
| 1 | ~ | XH_2p54_9P_male | J3 |
| 1 | USB_C_Plug_USB2.0 | USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | P1 |
| 1 | Battery_Cell | BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | SW_DPDT_X2 SW_Push | SW_Tactile_SPST_Angled_PTS645Vx31-2LFS | SW1 |
| 1 | SW_Push | SW_Tactile_SPST_Angled_PTS645Vx31-2LFS | SW2 |
| 8 | SW_Push | SW_MX_LowProfile_Kailh_Choc_V1V2_THT_Hybrid | SW3, SW5, SW6, SW7, SW8, SW9, SW10, SW14 |
| 2 | SW_Push | SW_PUSH-12mm | SW4, SW12 |
| 1 | DIP | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW11 |
| 1 | SW_Push | SW_PUSH_6mm | SW13 |
| 2 | LED | LED_0805_2012Metric | D1, D5 |
| 2 | 1N5819 LED | LED_0805_2012Metric | D2, D4 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | WS2812B LED | LED_0805_2012Metric | D3 |
| 1 | 2R2 | L_10.4x10.4_H4.8 | L1 |
| 2 | 100UF 10uF | C_0805_2012Metric | C1, C2 |
| 4 | 0.1UF 10uF | C_0805_2012Metric | C3, C4, C8, C9 |
| 4 | 10UF 10uF | C_0805_2012Metric | C5, C6, C7, C10 |
| 1 | 10UF 22uF | CP_EIA-3528-15_AVX-H_Pad1.50x2.35mm_HandSolder | C11 |
| 2 | 470NF 22uF | CP_EIA-3528-15_AVX-H_Pad1.50x2.35mm_HandSolder | C12, C13 |
| 5 | 10K | R_0805_2012Metric | R1, R14, R15, R16, R17 |
| 11 | 10K | R_0805_2012Metric | R2, R4, R5, R6, R7, R8, R9, R10 +3 |
| 1 | 6K2 10K | R_0805_2012Metric | R3 |
| 2 | 2R | R_0805_2012Metric | R18, R19 |
Esp gamepad v2 design files
The KiCad project lives in the Reiko0908/NeuralNetwork_Based_AutonomousCar repository on GitHub; these links point at the commit this page was built from.
Esp gamepad v2: common questions
What microcontroller does the Esp gamepad v2 use?
The Esp gamepad v2 is built around the L7806, from the ESP32 family.
How big is the Esp gamepad v2 PCB?
The Esp gamepad v2 measures 188.5 × 88.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp gamepad v2?
66 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp gamepad v2 design files?
From the Reiko0908/NeuralNetwork_Based_AutonomousCar repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Esp gamepad v2 design in my own project?
Yes, under the terms of its Apache-2.0 license, which Reiko0908 chose for the repository.
Can I test firmware for the Esp gamepad v2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in NeuralNetwork_Based_AutonomousCar
Earlier revisions in the repo: esp_gamepad
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k