10133

RGBKB·Keyboard-files·BANANA/10133-04 Kicad Project/10133.kicad_pcb

10133 PCB layout, top view — open source RP2040/RP2350 board by RGBKB

About the 10133 PCB

10133 is an open source RP2040/RP2350 PCB design by RGBKB, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 301.3 × 140.8 mm, with 236 components from 26 distinct parts.

Its main chip is the RP2040TR13, from the RP2040/RP2350 family. Other key parts include the MCP1700-3302E_SOT23 and W25Q32JVZP. By type, the board carries 69 capacitors, 54 LEDs, 48 relays, 27 diodes, 15 resistors and 11 connectors.

It belongs with the keyboards designs in this gallery.

From the project

Public files for keyboards and more

1. Print the case parts with the following settings: 1. ABS or ASA Material 2. 0.2mm layer height 3. 40% infill 4. 4 walls, 4 top and bottom layers 5. Scale Case part A (60146) and Switchplate (60145) to 100.7% scale. 6. Case part B (60147), part C (60146), and stand (60149) at 100% scale 2. Press fit the 6x6mm magnets into case part A and the stand 3. Press fit case parts B and C into part A 4. Screw the two M3 screws into the back of the stand (the case rests on the threads, not the head of the screw)

10133, from the project README
From the project README

Main components on the 10133

10133 bill of materials (BOM)

236 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040TR13
U1
1
MCP1700-3302E_SOT23
U2
1
W25Q32JVZP
U3
1
BSS138
Q1
1
12Mhz
Y1
10
MKi2c 1u
J3, J4, J5, J6, J7, J8, J9, J10 +2
1
USB_C_Receptacle_USB2.0
J13
4
encoder
E1, E2, E3, E4
48
KEYSW
K1, K2, K3, K4, K5, K6, K7, K8 +40
1
TM-2028
S1
2
KMR221NGLFS
SW1, SW2
48
WS2812B
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +40
6
WS2812B-2020
LED49, LED50, LED51, LED52, LED53, LED54
24
LBAV170LT1G
D1, D2, D3, D4, D5, D6, D7, D8 +16
1
1N4007
D13
2
GG0402052R542P
D26, D27
6
100nF
C1, C2, C3, C4, C5, C6
5
2.2uF
C7, C8, C9, C10, C13
2
15pF
C11, C12
56
100nF
C14, C15, C16, C17, C18, C19, C20, C21 +48
Show 6 more
QtyPartRefs
2
10kR
R1, R9
2
27R
R2, R3
1
200R
R4
2
1kR
R5, R8
2
7.15kR
R6, R7
6
5.1kR
R10, R11, R12, R13, R14, R15

10133 design files

The KiCad project lives in the RGBKB/Keyboard-files repository on GitHub; these links point at the commit this page was built from.

10133: common questions

What microcontroller does the 10133 use?

The 10133 is built around the RP2040TR13, from the RP2040/RP2350 family.

How big is the 10133 PCB?

The 10133 measures 301.3 × 140.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 10133?

236 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 10133 design files?

From the RGBKB/Keyboard-files repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 10133 design in my own project?

Yes, under the terms of its GPL-3.0 license, which RGBKB chose for the repository.

Can I test firmware for the 10133 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Keyboard-files

Similar boards