RadioMusic F rev2-2

rhinocerose·eurorack-designs·eurorack-RadioMusicSMD-SMDv2.2/RadioMusic_F rev2-2.kicad_pcb

About the RadioMusic F rev2-2 PCB

RadioMusic F rev2-2 is an open source NXP PCB design by rhinocerose, published on GitHub. It is a 2-layer board measuring 107 × 20 mm, with 53 components from 26 distinct parts.

Its main chip is the TEENSY_3.1_TW, from the NXP family. Other key parts include the LM1117MP-5.0 and TL074. By type, the board carries 21 resistors, 8 capacitors, 5 LEDs, 5 diodes, 3 ICs and 2 fuses.

It belongs with the audio designs in this gallery, and the repository also holds 1 earlier revision of it.

Main components on the RadioMusic F rev2-2

LM1117MP-5.0 TL074 TEENSY_3.1_TW

RadioMusic F rev2-2 bill of materials (BOM)

53 components, 26 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	LM1117MP-5.0	SOT223	IC1
1	TL074	SO14_262	IC4
1	TEENSY_3.1_TW	TEENSY_3.1_TW	U1
1	VERT_SD_CARD_REV2	VERT_MICROSD_REV2	X1
4	—	WQP-PJ301M-12_JACK	CHANNEL-CV0, OUTPUT0, RESET-CV0, TIME-CV0
2	50k	EVUF	CHANNEL-POT0, TIME-POT0
2	1206L020	1206L	F1, F2
1	D6_PUSH_SWITCH	D6_BUTTON_RND	RESET0
1	—	MA05-2	SV1
5	—	LED3MM	LED1, LED2, LED3, LED4, LED5
2	1N5819	SOD-123_467	D1, D2
3	BAT54S	SOT23_210	D5, D6, D9
2	1n	C0805_334	C1, C4
4	100N 100n	C0805_334	C2, C3, C5, C8
2	10UF 10uf	PANASONIC_B_348	C9, C10
2	47R	R0805_334	R1, R2
2	8.2K 8.2k	R0805_334	R3, R4
1	330K	R0805_334	R5
2	100K 100k	R0805_334	R6, R19
1	1k	R0805_334	R7

Show 6 more

Qty	Part	Footprint	Refs
1	10K 10k	R0805_334	R8
2	22K 22k	R0805_334	R9, R20
2	47K 47k	R0805_334	R10, R21
5	1.5K 1.5k	R0805_334	R11, R12, R13, R14, R15
1	15K 15k	R0805_334	R16
2	220R	R0805_334	R17, R18

RadioMusic F rev2-2 design files

The KiCad project lives in the rhinocerose/eurorack-designs repository on GitHub; these links point at the commit this page was built from.

RadioMusic F rev2-2: common questions

What microcontroller does the RadioMusic F rev2-2 use?

The RadioMusic F rev2-2 is built around the TEENSY_3.1_TW, from the NXP family.

How big is the RadioMusic F rev2-2 PCB?

The RadioMusic F rev2-2 measures 107 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RadioMusic F rev2-2?

53 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RadioMusic F rev2-2 design files?

From the rhinocerose/eurorack-designs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.