808 bass drum1
About the 808 bass drum1 PCB
808 bass drum1 is an open source PCB design by rhinocerose, published on GitHub. It is a 2-layer board measuring 14.9 × 89.5 mm, with 56 components from 30 distinct parts.
Other key parts include the OPAMP-TL072D. By type, the board carries 27 resistors, 12 capacitors, 6 transistors, 3 diodes, 1 IC and 1 connector.
It belongs with the audio designs in this gallery.
Main components on the 808 bass drum1
808 bass drum1 bill of materials (BOM)
56 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OPAMP-TL072D | SO08_1879502 | IC1 |
| 5 | bc546 | SOT23-BEC_1879502 | Q1, Q3, Q4, Q5, Q6 |
| 1 | bc556 | SOT23-BEC_1879502 | Q2 |
| 1 | HEADER-EUROPWR_2X05-OPEN | 2X05_EUROPWR_OPEN_1879502 | J1 |
| 3 | JACK_THONKICONNNEW | WQP-PJ301M-12_JACK_1879502 | ACCENT0, OUT0, TRIG0 |
| 1 | 500K(B) | 9MM_PLS_1879502 | DECAY0 |
| 1 | 100KA | 9MM_PLS_1879502 | LEVEL0 |
| 1 | 10K(C) | 9MM_PLS_1879502 | TONE0 |
| 3 | 1N4148 | SOD323W_INFINEON_1879502 | D1, D52, D53 |
| 1 | 0.1 | C0603_1879502 | C1 |
| 2 | 100n | C0603_1879502 | C38, C45 |
| 1 | 33n | C0603_1879502 | C39 |
| 3 | 15n | C0603_1879502 | C40, C41, C42 |
| 1 | 33/6.3 | E2,5-5_1879502 | C43 |
| 2 | .47/50 | E2,5-5_1879502 | C47, C49 |
| 1 | 220p | C0603_1879502 | C48 |
| 1 | 1/50 | E2,5-5_1879502 | C50 |
| 5 | 100K | R0603_1879502 | R1, R159, R163, R174, R176 |
| 3 | 22K | R0603_1879502 | R152, R160, R168 |
| 3 | 10K | R0603_1879502 | R153, R154, R172 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4K7 | R0603_1879502 | R155, R162 |
| 3 | 1M | R0603_1879502 | R156, R161, R167 |
| 1 | 8K2 | R0603_1879502 | R157 |
| 1 | 2K7 | R0603_1879502 | R158 |
| 3 | 47K | R0603_1879502 | R164, R165, R169 |
| 2 | 6K8 | R0603_1879502 | R166, R173 |
| 1 | 470K | R0603_1879502 | R170 |
| 1 | 220R | R0603_1879502 | R171 |
| 1 | 1K | R0603_1879502 | R175 |
| 1 | 82K | R0603_1879502 | R177 |
808 bass drum1 design files
The KiCad project lives in the rhinocerose/eurorack-designs repository on GitHub; these links point at the commit this page was built from.
808 bass drum1: common questions
How big is the 808 bass drum1 PCB?
The 808 bass drum1 measures 14.9 × 89.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 808 bass drum1?
56 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 808 bass drum1 design files?
From the rhinocerose/eurorack-designs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 808 bass drum1 design in my own project?
The repository has no license, so all rights stay with rhinocerose. Use it as a reference, and ask the author before reusing the design.
More boards in eurorack-designs
NXP1uT u v1 1
149 × 28.7 mm128 parts2LNo license0
NXP1uO c v 2.2
149 × 28.7 mm122 parts2LNo license0
1U Rim
56.9 × 28.7 mm76 parts2LNo license0
AVR/ArduinoEurorack hagiwo euclidean
90.4 × 127.3 mm67 parts2LNo license0
NXPRadioMusic F rev2-2
107 × 20 mm53 parts2LNo license0
1U Headphone
57 × 28.7 mm51 parts2LNo license0
Buffer 1.2
19.1 × 108.5 mm50 parts2LNo license0
AVR/ArduinoMain
30 × 110.5 mm49 parts2LNo license0
Kompari
28.5 × 100 mm34 parts2LNo license0
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687