Livingroom acbot

richardsamuels·livingroom-acbot·PCB/esp.kicad_pcb

Livingroom acbot PCB layout, top view — open source ESP32 board by richardsamuels

About the Livingroom acbot PCB

Livingroom acbot is an open source ESP32 PCB design by richardsamuels, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 30 × 40.1 mm, with 42 components from 24 distinct parts.

Its main chip is the ESP32-C3FN4, from the ESP32 family. Other key parts include the LDL111733R and USBLC6-2SC6. By type, the board carries 15 capacitors, 12 resistors, 6 connectors, 3 ICs, 2 switches and 2 inductors.

It belongs with the robotics & motion and iot & wireless designs in this gallery.

From the project

A robot to control my old window AC over the internet via Home Assistant

A custom PCB can be found in ./PCB. The expected servo pinout is (Control, 5V, GND), where Control is indicated on the silkscreen with a solid colored pin.

Note: This BOM does not include parts on custom PCB. See the JLCPCB-compatible PCB BOM for those items, which can be used to purchase a fully assembled PCB from JLCPCB.

* The original version of this PCB used a photoresistor to detect the on/off state of the AC, see below for the flaws of this approach

Livingroom acbot, from the project README
From the project README

Main components on the Livingroom acbot

Livingroom acbot bill of materials (BOM)

42 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3FN4
U201
1
LDL111733R
U301
1
USBLC6-2SC6
U302
1
CRYSTAL_GND24
Crystal_GND24
Y201
2
CONN_01X03_PIN
Conn_01x03_Pin
J101, J102
1
CONN_01X02_SOCKET
Conn_01x02_Socket
J103
1
CONN_01X04_SOCKET
Conn_01x04_Socket
J104
1
CONN_01X03_SOCKET
Conn_01x03_Socket
J105
1
USB_C_PLUG_USB2.0
USB_C_Plug_USB2.0
P301
1
2.4GHz aerial
AE201
2
SW_Push
SW201, SW202
2
2N2
2n2
L201, L202
2
3P3
3p3
C201, C202
1
1u
C203
1
10N
10n
C204
1
10U
10u
C205
4
0.1U
0.1u
C206, C207, C209, C210
2
0.1U
100n
C208, C211
2
12P
12p
C212, C213
2
22UF
22uF
C301, C302
Show 4 more
QtyPartRefs
1
50K
50k
R101
1
470R
R201
9
5K1
5k1
R202, R203, R204, R205, R206, R301, R302, R303 +1
1
22R
R207

Livingroom acbot design files

The KiCad project lives in the richardsamuels/livingroom-acbot repository on GitHub; these links point at the commit this page was built from.

Livingroom acbot: common questions

What microcontroller does the Livingroom acbot use?

The Livingroom acbot is built around the ESP32-C3FN4, from the ESP32 family.

How big is the Livingroom acbot PCB?

The Livingroom acbot measures 30 × 40.1 mm, has 4 copper layers and is 1.62684 mm thick.

How many components are on the Livingroom acbot?

42 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Livingroom acbot design files?

From the richardsamuels/livingroom-acbot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Livingroom acbot design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which richardsamuels chose for the repository.

Can I test firmware for the Livingroom acbot without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards