5 open source boards using the ESP32-C3FN4

Real designs built with the ESP32-C3FN4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the ESP32-C3FN4

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESP32-C3FN4 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD3P3 pins have a capacitor to GND on 5 of 5 designs, most often 100 nF.
  • The VDD3P3 pins have a inductor on 5 of 5 designs, most often 2.2 nH (then 2 nH).
  • The CHIP_EN pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 5.1 kΩ).
  • The CHIP_EN pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 10 µF).
LNA_INpin 1Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 80% · 3.3 pF (2), 1.6 pF (1)
  • Inductor on 80% · 2.2 nH (2), 2 nH (1)
VDD3P3pin 2, 3Connected to: Signal 60% · VDD3_3_RF 40%
  • Capacitor to GND on 100% · 100 nF (10)
  • Inductor on 100% · 2.2 nH (6), 2 nH (4)
XTAL_32K_P/ADC1_CH0pin 4Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 0 Ω (1), 150 Ω (1)
XTAL_32K_N/ADC1_CH1pin 5Connected to: Signal 60% · not connected 40%
  • Capacitor to GND on 40% · 18 pF (2)
GPIO2/ADC1_CH2pin 6Connected to: A connector 40% · not connected 20%
  • Pull-up to 3.3V on 60% · 10 kΩ (2), 5.1 kΩ (1)
CHIP_ENpin 7Connected to: Signal 100%
  • Pull-up to 3.3V on 100% · 10 kΩ (3), 5.1 kΩ (2)
  • Capacitor to GND on 100% · 100 nF (4), 10 µF (1)
VDD3P3_RTCpin 11Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (9), 1 µF (3), 10 nF (2)
  • Inductor on 60% · 2 nH (2), 2.2 nH (1)
GPIO8pin 14Connected to: Signal 100%
  • Pull-up to 3.3V on 60% · 10 kΩ (2), 5.1 kΩ (1)
GPIO9/BOOTpin 15Connected to: A connector 40%
  • Capacitor to GND on 60% · 10 pF (1), 10 nF (1), 100 nF (1)
  • Pull-up to 3.3V on 60% · 10 kΩ (2), 5.1 kΩ (1)
VDD3P3_CPUpin 17Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (6), 1 µF (2), 10 nF (2)
VDD_SPI/GPIO11pin 18Connected to: VDD_SPI 60% · not connected 20% · a signal 20%
  • Decoupling capacitor on 40% · 1 µF (2), 10 nF (2)
SPIHD/GPIO12pin 19Connected to: Not connected 80% · a signal 20%
SPIWP/GPIO13pin 20Connected to: Not connected 80% · a signal 20%
SPICS0/GPIO14pin 21Connected to: Not connected 60% · a signal 40%
SPICLK/GPIO15pin 22Connected to: Not connected 80% · a signal 20%
SPID/GPIO16pin 23Connected to: Not connected 80% · a signal 20%
SPIQ/GPIO17pin 24Connected to: Not connected 80% · a signal 20%
GPIO18/USB_D-pin 25Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 22 Ω (2)
GPIO19/USB_D+pin 26Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 22 Ω (2)
U0TXD/GPIO21pin 28Connected to: Signal 80% · not connected 20%
  • Series resistor on 80% · 1 Ω (1), 150 Ω (1), 499 Ω (1)
XTAL_Npin 29Connected to: Signal 100%
  • Capacitor to GND on 100% · 18 pF (2), 16 pF (1), 15 pF (1)
  • Crystal on 80% · 40 MHz (2)
XTAL_Ppin 30Connected to: Signal 100%
  • Series resistor on 60% · 22 Ω (2), 0 Ω (1)
  • Capacitor to GND on 40% · 16 pF (1), 18 pF (1)
VDDApin 31, 32Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 1 µF (8), 100 nF (7), 10 nF (6)
  • Inductor on 60% · 2 nH (4), 2.2 nH (2)
GNDpin 33Connected to: GND 100%

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include XIAO ESP32C3 by bombarie, Switch-Ornament by esprit1711, Gizmo card by neta79 and WaterflowSensor-PCB by ragilalfarizi.

The ESP32-C3FN4 in open source designs

The gallery holds 5 open source boards using the ESP32-C3FN4 from 5 GitHub repositories; a typical one measures about 38 × 40.1 mm and carries around 42 components.

60% use four copper layers or more, and 20% carry an open source license.

The most starred is XIAO ESP32C3 by bombarie.

Microcontrollers on boards using the ESP32-C3FN4

What boards using the ESP32-C3FN4 are built for

ESP32-C3FN4: common questions

Where can I find a ESP32-C3FN4 reference design?

Each of the 5 boards on this page is a real design using the ESP32-C3FN4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-C3FN4 VDD3P3 pin connected?

The VDD3P3 pins have a capacitor to GND on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the ESP32-C3FN4.

What pull-up resistor is used on the ESP32-C3FN4 CHIP_EN pin?

The CHIP_EN pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 5 open source designs using the ESP32-C3FN4.

How is the ESP32-C3FN4 XTAL_N pin connected?

The XTAL_N pin has a capacitor to GND on 5 of 5 designs, most often 18 pF (then 16 pF). Counted from the KiCad layouts of 5 open source designs using the ESP32-C3FN4.

Which microcontrollers do boards using the ESP32-C3FN4 use?

Most are built on ESP32 (5).

How big is a typical board using the ESP32-C3FN4?

The median is 38 × 40.1 mm, and 40% are two-layer designs.

What is the most popular open source board using the ESP32-C3FN4?

By GitHub stars, XIAO ESP32C3 by bombarie, with 1 stars.

Can I simulate one of these boards using the ESP32-C3FN4 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part