STM32 IOT GATEWAY
RiddheshVeling·Industrial-Flowmeter-Totalizer-with-Modbus-based-HMI-and-Data-Logging·PCB/STM32_IOT_GATEWAY/STM32_IOT_GATEWAY/STM32_IOT_GATEWAY.kicad_pcb
About the STM32 IOT GATEWAY PCB
STM32 IOT GATEWAY is an open source STM32 PCB design by RiddheshVeling, published on GitHub. It is a 2-layer board measuring 99 × 105 mm, with 154 components from 66 distinct parts.
Its main chip is the STM32G070RBT6, from the STM32 family. Other key parts include the PC817, LM2596S-ADJ, EC200UCNAC-N05-SNNSA, AMS1117-3.3 and MAX485E. By type, the board carries 64 resistors, 33 capacitors, 17 diodes, 11 ICs, 10 transistors and 8 connectors.
It belongs with the iot & wireless designs in this gallery.
From the project
EXTC Final year project: Industrial flowmeter totalizer with Modbus-based HMI for real-time monitoring and data logging using STM32 and RS485. Includes valve control, edge condition handling, and Python Modbus simulator. Sponsored by Technode IoT Solutions.
Main components on the STM32 IOT GATEWAY
STM32 IOT GATEWAY bill of materials (BOM)
154 components, 66 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | PC817 | DIP-4_W8.89mm_SMDSocket_LongPads | U1, U2, U4, U5 |
| 1 | LM2596S-ADJ | TO-263-5_TabPin3 | U3 |
| 1 | EC200UCNAC-N05-SNNSA | XCVR_EC200UCNAC-N05-SNNSA | U6 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U7 |
| 1 | STM32G070RBT6 | QFP50P1200X1200X160-64N | U8 |
| 1 | MAX485E | SO-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | TP4056_IC | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U10 |
| 1 | W25Q32JVSS | SOIC-8_5.23x5.23mm_P1.27mm | U11 |
| 10 | BC847 | BC847_long_pad | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +2 |
| 1 | 32.678KHz | Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal_1EP_style1 | Y1 |
| 1 | 8MHz | Crystal_HC49-U_Vertical | Y2 |
| 1 | U.FL-R-SMT(01) | HRS_U.FL-R-SMT(01) | J1 |
| 1 | 2TB | 2TB_PHOENIX | J2 |
| 1 | SIM_Card | SIM_tray_push_type_yellow_black | J3 |
| 1 | 16TB | 16TB_PHOENIX | J4 |
| 1 | PROGRAM | 4_pin_perfect | J5 |
| 1 | UART | 4_pin_perfect | J6 |
| 1 | SMALL BAT | 2Pin_Header_chinmay | J7 |
| 1 | BATTERY_HOLDER | BatteryHolder_MPD_BH-18650-PC2 | J8 |
| 1 | Antenna_Shield | GSM_Antenna_Perfect | AE1 |
Show 46 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CR1220 | BAT_S8411-45R | BT1 |
| 1 | RUEF200 | Fuse_RUEF300 | F1 |
| 2 | G5LE-1 | Relay_SPDT_Omron-G5LE-1 | K1, K2 |
| 1 | 0R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | NOBAT1 |
| 1 | SW_Push | SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1 |
| 1 | Slide_Switch | Slide_Switch | SW2 |
| 1 | DB207S | DIOB_DB107S | D1 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | SS34 | D_2114_3652Metric_Castellated | D3 |
| 1 | 3.9V | D_MiniMELF | D4 |
| 1 | POWER | LED_D3.0mm | D5 |
| 3 | D_TVS | D_SMB | D6, D7, D8 |
| 2 | RX | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D9, D17 |
| 2 | RELAY_LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D10, D13 |
| 2 | M7 | D_MiniMELF | D11, D14 |
| 1 | NETWORK | LED_D3.0mm | D12 |
| 1 | SMS | LED_D3.0mm | D15 |
| 1 | STATUS | LED_D3.0mm | D16 |
| 1 | 47uH | Inductor_Coil_L_12x12mm_H8mm_LM2596 | L1 |
| 2 | 470uF 35V | Cap_D10.0mm_P5.00mm_1000uf_16V | C1, C10 |
| 6 | 0.1uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C9, C17, C19, C27, C33 |
| 5 | 1uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C7, C8, C11 |
| 1 | 10pf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 2 | 33pf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C24 |
| 3 | 100uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13, C23 |
| 6 | 10uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C18, C20, C21, C26, C28 |
| 2 | 100uf | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15, C16 |
| 4 | 22pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22, C25, C29, C32 |
| 1 | 470uf 16V | CP_Radial_D7.5mm_P2.50mm | C30 |
| 1 | 100uf | 10uF_25V_Keltron | C31 |
| 8 | 120R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R15, R16, R17, R18 |
| 14 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R7, R21, R26, R28, R30, R31, R32 +6 |
| 4 | 560R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R54, R58, R59 |
| 2 | 47K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 12 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R19, R20, R27, R29, R34 +4 |
| 7 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R35, R36, R37, R55, R60, R61 |
| 4 | 22R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R23, R24, R25 |
| 1 | 330R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 120 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R40 |
| 2 | 220K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R41, R42 |
| 3 | 0R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R43, R44, R64 |
| 1 | 0-Link | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R45 |
| 2 | 220R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R49, R62 |
| 1 | 2.2K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R51 |
| 1 | 0.4R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R53 |
| 1 | BV_LINK | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R63 |
STM32 IOT GATEWAY design files
The KiCad project lives in the RiddheshVeling/Industrial-Flowmeter-Totalizer-with-Modbus-based-HMI-and-Data-Logging repository on GitHub; these links point at the commit this page was built from.
STM32 IOT GATEWAY: common questions
What microcontroller does the STM32 IOT GATEWAY use?
The STM32 IOT GATEWAY is built around the STM32G070RBT6, from the STM32 family.
How big is the STM32 IOT GATEWAY PCB?
The STM32 IOT GATEWAY measures 99 × 105 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32 IOT GATEWAY?
154 components, from 66 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32 IOT GATEWAY design files?
From the RiddheshVeling/Industrial-Flowmeter-Totalizer-with-Modbus-based-HMI-and-Data-Logging repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32 IOT GATEWAY design in my own project?
The repository has no license, so all rights stay with RiddheshVeling. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32 IOT GATEWAY without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Industrial-Flowmeter-Totalizer-with-Modbus-based-HMI-and-Data-Logging
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k