Front Panel PCB 1

RiddheshVeling·Industrial-Flowmeter-Totalizer-with-Modbus-based-HMI-and-Data-Logging·PCB/Front_Panel_1/Front_Panel_PCB_1/Front_Panel_PCB_1.kicad_pcb

Front Panel PCB 1 layout, top view — open source ESP32 board by RiddheshVeling

About the Front Panel PCB 1

Front Panel PCB 1 is an open source ESP32 PCB design by RiddheshVeling, published on GitHub. It is a 2-layer board measuring 85 × 85 mm, with 45 components from 25 distinct parts.

Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the AMS1117-3.3, DS3231M and DS1307Z+. By type, the board carries 14 resistors, 7 capacitors, 6 connectors, 5 ICs, 4 switches and 3 transistors.

It belongs with the iot & wireless designs in this gallery.

From the project

EXTC Final year project: Industrial flowmeter totalizer with Modbus-based HMI for real-time monitoring and data logging using STM32 and RS485. Includes valve control, edge condition handling, and Python Modbus simulator. Sponsored by Technode IoT Solutions.

Main components on the Front Panel PCB 1

Front Panel PCB 1 bill of materials (BOM)

45 components, 25 distinct parts.

QtyPartRefs
2
AMS1117-3.3
U1, U4
1
DS3231M
U2
1
ESP32-WROOM-32D
U3
1
DS1307Z+
U6
3
BC847
Q1, Q2, Q3
1
32.768KHz
Y1
1
ESP_Connector
J1
1
LCD_TFT_Connector
J2
1
F_DATA_TO_LP
J3
1
F_SUPPORT1
J4
1
F_DATA_TO_RP
J5
1
F_SUPPORT2
J6
1
S8411-45R
BT1
1
Buzzer
BZ1
4
SW_MEC_5E
SW1, SW2, SW3, SW4
1
DIODE
D1
1
TX
D6
1
RX
D7
1
100uF
C1
4
0.1uF
C2, C3, C5, C6
Show 5 more
QtyPartRefs
2
10uF
C4, C7
8
10K
R1, R2, R3, R4, R17, R18, R19, R20
3
1K
R5, R7, R8
1
10R
R6
2
220R
R28, R30

Front Panel PCB 1 design files

The KiCad project lives in the RiddheshVeling/Industrial-Flowmeter-Totalizer-with-Modbus-based-HMI-and-Data-Logging repository on GitHub; these links point at the commit this page was built from.

Front Panel PCB 1: common questions

What microcontroller does the Front Panel PCB 1 use?

The Front Panel PCB 1 is built around the ESP32-WROOM-32D, from the ESP32 family.

How big is the Front Panel PCB 1?

The Front Panel PCB 1 measures 85 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Front Panel PCB 1?

45 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the Front Panel PCB 1 design files?

From the RiddheshVeling/Industrial-Flowmeter-Totalizer-with-Modbus-based-HMI-and-Data-Logging repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Front Panel PCB 1 design in my own project?

The repository has no license, so all rights stay with RiddheshVeling. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Front Panel PCB 1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Industrial-Flowmeter-Totalizer-with-Modbus-based-HMI-and-Data-Logging

Similar boards