ArduFM2612

rimowals·ArduFM2612·Board/ArduFM.kicad_pcb

ArduFM2612 PCB layout, top view — open source AVR/Arduino board by rimowals

About the ArduFM2612 PCB

ArduFM2612 is an open source AVR/Arduino PCB design by rimowals, published on GitHub. It is a 2-layer board measuring 87.5 × 95 mm, with 51 components from 27 distinct parts.

Its main chip is the ATmega328-P, from the AVR/Arduino family. Other key parts include the LM7809_TO220, LM7805_TO220, YM2612, CNY17-1 and LM386. By type, the board carries 23 capacitors, 8 ICs, 8 resistors, 4 connectors, 4 diodes and 1 transistor.

From the project

Wskazówki: 1. Uruchom DRC/ERC przed produkcją 2. Zweryfikuj footprint i orientację YM2812 3. Sprawdź sekcję zasilania i tor audio

Wskazówki: 1. Uruchom DRC/ERC przed produkcją 2. Zweryfikuj footprint i orientację YM2812 3. Sprawdź sekcję zasilania i tor audio

Tips: 1. Run DRC/ERC before fabrication 2. Verify YM2812 footprint and orientation 3. Review power section and audio path

Main components on the ArduFM2612

ArduFM2612 bill of materials (BOM)

51 components, 27 distinct parts.

QtyPartRefs
1
ATmega328-P
U1
1
LM7809_TO220
U2
2
LM7805_TO220
U3, U4
1
YM2612
U5
1
CNY17-1
U6
2
LM386
U7, U8
1
16MHz
Q1
1
Conn_PWR
J1
1
ICSP
J2
1
Conn_MIDI
J3
1
Conn_AUDIO
J4
2
10K
RV1, RV2
1
SW_RESET
SW1
1
1N4004
D1
2
LED
D2, D3
1
1N4148
D4
7
100n
C1, C3, C9, C10, C11, C12, C13
2
27p
C2, C5
1
220uF
C4
5
100uF
C6, C7, C8, C17, C19
Show 7 more
QtyPartRefs
2
16uF
C14, C15
2
100nF
C16, C18
2
47nF
C20, C21
2
1000uF
C22, C23
3
1K
R1, R4, R6
3
220
R2, R3, R5
2
10
R7, R8

ArduFM2612 design files

The KiCad project lives in the rimowals/ArduFM2612 repository on GitHub; these links point at the commit this page was built from.

ArduFM2612: common questions

What microcontroller does the ArduFM2612 use?

The ArduFM2612 is built around the ATmega328-P, from the AVR/Arduino family.

How big is the ArduFM2612 PCB?

The ArduFM2612 measures 87.5 × 95 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ArduFM2612?

51 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the ArduFM2612 design files?

From the rimowals/ArduFM2612 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ArduFM2612 design in my own project?

The repository has no license, so all rights stay with rimowals. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ArduFM2612 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards