14 open source boards using the YM2612

Real designs built with the YM2612, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the YM2612

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the YM2612 connects to, and the resistors, capacitors and other passives placed on it.

  • The MOR pin has a series capacitor on 8 of 10 designs, most often 10 µF (then 1 µF).
  • The MOL pin has a series capacitor on 8 of 10 designs, most often 10 µF (then 1 µF).
  • The AVCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 330 pF).
  • The IRQ pin is left unconnected on 8 of 9 designs.
GNDpin 1, 12Connected to: GND 100%
NCpin 10Connected to: Not connected 100%
IRQpin 13Connected to: Not connected 89%
AGNDpin 19Connected to: GND 100%
MORpin 20Connected to: Signal 100%
  • Series capacitor on 80% · 10 µF (7), 1 µF (1)
  • Resistor to GND on 60% · 2.2 kΩ (6)
MOLpin 21Connected to: Signal 100%
  • Series capacitor on 80% · 10 µF (7), 1 µF (1)
  • Resistor to GND on 60% · 2.2 kΩ (6)
AVCCpin 22Connected to: 5V 100%
  • Decoupling capacitor on 70% · 100 nF (5), 330 pF (1), 330 µF (1)
VCCpin 23Connected to: 5V 100%
  • Decoupling capacitor on 50% · 100 nF (5)

15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GeneSynth Motherboard by theacodes, STM32 VGM Player YM2612 SN76489 by AidanHockey5, MegaMIDI by AidanHockey5 and Genny by superjoebob.

The YM2612 in open source designs

The gallery holds 14 open source boards using the YM2612 from 12 GitHub repositories; a typical one measures about 124.5 × 100 mm and carries around 102 components.

92% are two-layer designs, the rest use four layers or more, and 64% carry an open source license.

The most starred is GeneSynth Motherboard by theacodes.

Microcontrollers on boards using the YM2612

YM2612: common questions

Where can I find a YM2612 reference design?

Each of the 14 boards on this page is a real design using the YM2612. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the YM2612 MOR pin connected?

The MOR pin has a series capacitor on 8 of 10 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the YM2612.

How is the YM2612 MOL pin connected?

The MOL pin has a series capacitor on 8 of 10 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the YM2612.

What decoupling capacitors do designs use on the YM2612 AVCC pin?

The AVCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 330 pF). Counted from the KiCad layouts of 10 open source designs using the YM2612.

What parts are used alongside the YM2612?

The SN76489, LD1117S33TR_SOT223, LD1117S50TR_SOT223, LM2733XMF and LM386 appear in the most repositories here.

Which microcontrollers do boards using the YM2612 use?

Most are built on AVR/Arduino (3), NXP (3), ESP32 (2) and Microchip SAM (1).

How big is a typical board using the YM2612?

The median is 124.5 × 100 mm, and 92% are two-layer designs.

What is the most popular open source board using the YM2612?

By GitHub stars, GeneSynth Motherboard by theacodes, with 177 stars.

Can I simulate one of these boards using the YM2612 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part